If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Steve Barker on July 24, 2007, 11:46 am
I'm having the foundation replaced on a house we just bought. The existing
water line is now exposed and is 3/4" (what was originally galvanized iron).
IF I can't cut this pipe off clean and re thread the end, what are my other
choices for adding on to it? Going all the way back to the meter is not
really an option due to distance, expense, and a sidewalk it goes under.
thanks for any and all ideas.
--
Steve Barker
|
|
Posted by Dennis on July 24, 2007, 6:16 pm
As far as materials go, the following are acceptable as water service pipe:
abs, brass, cpvc, copper, pex-al-pex, pex, ductile iron, galvanized steel,
pb, pe-al-pe, pe, pp, pvc & stainless. What's usually used today is pex &
copper.
You could cut off the end of the galvanized pipe and install a compression
fitting and transition to one of the other types of piping.
Although you would be better off replacing the galvanized with pex and going
to 1" or larger. The sidewalk isn't a problem, just punch through under it
(done all the time).
Now for the real question; your "replacing your home's foundation"? Really?
Is this a mobile home?
> I'm having the foundation replaced on a house we just bought. The
> existing water line is now exposed and is 3/4" (what was originally
> galvanized iron). IF I can't cut this pipe off clean and re thread the
> end, what are my other choices for adding on to it? Going all the way
> back to the meter is not really an option due to distance, expense, and a
> sidewalk it goes under.
|
|
Posted by Steve Barker on July 24, 2007, 10:56 pm
No, it's a hundred year old craftsman bungalow, about 26 x 40 footprint.
Had about a third of it in basement. All four walls were originally "flint
rock" concrete poured in place with a form on only one side. I guess from
what I've been told, that's the way they did it back then. At least in this
area. All four walls were caving in and had moved out from under the plate
of the house! We bought it out of foreclosure and bought it right even
doing the work we're doing, we'll only be into it for about $10,000 more
than it's worth. It's going to be a rental and we already have a tenant
waiting for it. The new dig extends the basement another 8 feet into the
existing house and 12 feet out the back for a new 12 x 22 sun porch. Lifted
the whole house straight up 2 feet, (without disturbing the nice front
porch) and then the foundation man went to work. I'll get some pics up on
the web here in a day or two if your interested in seeing the project.
--
Steve Barker
>
> Now for the real question; your "replacing your home's foundation"?
> Really?
> Is this a mobile home?
>
>
|
|
Posted by DAC on July 25, 2007, 12:20 pm
I'll get some pics up on the web here in a day or two if your
interested in seeing the project.
Sounds like an neat project, I'd be interested in the pictures.
|
| Similar Threads | Posted | | question on wells VS very long water line | July 20, 2006, 8:07 am |
| high voltage electrical & water supply line | November 19, 2006, 8:04 pm |
| Adding 2nd floor above detached garage | March 18, 2007, 7:07 pm |
| Help pls: adding 2nd floor to Cape Cod-style house | November 24, 2007, 6:21 pm |
| Bricklaying - adding a new wall at right-angles to an existing one | March 1, 2008, 5:18 pm |
| cutting into cast iron waste stack | March 25, 2007, 8:00 pm |
| Tips on replacing sections of cast iron drain pipe | January 6, 2007, 10:02 am |
| Need Used Heavy Equipment such as; Backhoes, Excavators, Dozers, Graders, Cranes, Skidders, Loaders, Forestry, Farming, and/or any type of Construction equipment .....Please visit Iron Globe | May 2, 2007, 11:30 am |
| Water Trailers/Water Hauler/Water Buffalo/Water Transporter by Northland Products, Inc. | July 9, 2007, 3:25 pm |
| Zero Lot Line | August 31, 2006, 5:47 pm |
|
|