|
Posted by SteveF on December 9, 2006, 4:53 pm
> Hello,
> What are you guys using for priming raw wallboard and taped joints in a
> basement? At the borg, there are primers available, but the primer say
> "low-moisture" areas. Humidity in the basement is around 55% or so.
> .
> Just curious to read what you are using. I figured Kilz would be fine.
> Thank you.
>
>
Kilz is what I use. 55% is on the low end for the basement I had in North
Carolina.
Steve.
|