If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by bent on May 21, 2007, 3:11 pm
I have a large Horizontal std house eaves run, maybe 35'-40', and when rain
really comes down, particularly when the eaves has not been cleaned out
recently, I get an overflowing waterfall around the middle of that run. The
overflowing waterfall is right where there is a basement window, and it
flows into the house and all over the floor, so I have a problem. Even when
I clean it out every few months it will happen.
Is the type with the Aluminum nails placed through the eaves. I do not know
how these nails are installed, if they are pre-drilled and therefore
precisely located, or if they can be re-hammered in, etc. I am specifically
interested in the mechanical connection of the nails to the house.
I don't know if there is a flat wood board the nails are in, what type of
wood or how thick, or if several boards, or if I can re-use the same nail
holes, with or without larger diameter nails, or shims, or if I can position
other or additional nail hole locations. My problem is re-inforcing and
improving, because I can't leave it, considering the position of the window.
SO,
How do I diagnose and fix the problem wrt the nails. My guess is I would
start by running a string line because its a large run, and thus easily
overflows. Where do I start to determine if/how to do this?
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
|
Posted by bent on May 22, 2007, 8:04 pm
the original eaves was retrofitted with new aluminum eaves and has new
soffits and an entire wrapping of aluminum trim, so I can't see what kind of
mounting there would be
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
|
Posted by bent on May 23, 2007, 11:41 am
> the original eaves was retrofitted with new aluminum eaves and has new
> soffits and an entire wrapping of aluminum trim, so I can't see what kind
> of mounting there would be
....on these retrofitted gutters that are overflowing. Since all I can see
behind them is retrofitted Aluminum trim and soffits. Those nails are
magically delicious.
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
|
Posted by longshot on May 23, 2007, 5:57 am
are you talking about gutters?
|
|
Posted by bent on May 23, 2007, 11:34 am
yes, I just got a strange e-mail, something about gutters and downspouts. I
thought an eavestrough was a gutter.
"A rain gutter (also known as eavestrough, guttering or just gutter) is a
narrow channel, or trough, forming the component of a roof system which
collects and diverts rainwater shed by the roof. In many buildings..."
from http://en.wikipedia.org/wiki/Rain_gutter
I was hoping for a layman's definition so I could clarify
> are you talking about gutters?
>
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
Page 1 of 3 1 2 3 > last >>
| Similar Threads | Posted | | Powerwashing the eaves, how long to dry | July 31, 2008, 3:35 pm |
| Best wall construction to stop a truck. | March 5, 2007, 12:00 pm |
| Stop letting your Electric Company get away with increasing your rates! | January 19, 2007, 9:27 am |
| Why Teco Nails? | July 26, 2008, 11:03 pm |
| Siding Nails in a Roofing nailer? | November 16, 2006, 2:03 pm |
| nails vs staples, 3/4 hardwood floor | April 29, 2007, 10:55 pm |
| Framing Nails and Nail guns | July 16, 2007, 9:54 pm |
| Nails or screws for old cedar siding? | May 4, 2008, 9:29 am |
| 30-year-old Pole Barn Roof Nails | December 11, 2006, 5:38 pm |
| Best Nails for Woodshed construction ?? P-T wood ratings ? | May 8, 2006, 8:46 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap