|
Posted by Sasquatch on November 19, 2006, 4:17 am
Thanks for the tips. I'm also going to see if Fypon will make a custom
flat arch piece that is 1-1/2" thick. Then it would be big enough for
me to notch out a proper J channel in the back with an appropriate
looking thickness left over.
Thanks,
John
david ashworth wrote:
> I would take a 5/4" by sheet of Fypon material and trace the radius of the
> window. Make this piece the correct width to match the side trim. Make 2
> small Plinthe stlye blocks or thin 1 by 2flat blocks with the front edge
> rounded or ogeed.Install either one at the junction of the top and side trim
> pieces. This will break up the continuous look of the trim. Plow the back
> of the new trim so the j channel will fit behind it. Alcoa sells a nice flex
> j channel. I looked at the link, nice looking home!
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap