Home Page link

Re: Cutting Paper-backed insulation

Home| Search | About
Login Password
Register Now! Lost Password?

Building Construction - Building Construction Industry Discussions. 

Page 2 of 2       << first < 1 2 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Re: Cutting Paper-backed insulation Syzygy 09-30-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Steve Barker LT on October 1, 2007, 2:47 pm
The hand should be holding the twobyfour down. Might catch a thumb
though....

s



>I suggest that you don't get too carried a way cutting and drag that
>serrated knife across the back of your hand. I have seen it happen.
>



Posted by Glenn on October 1, 2007, 6:27 pm
True but I would never use anything like wood as a
straight edge to cut against. I used only metal
because a knife can catch in the wood and drag up and
across the top of it. As I said, I have seen it
happen.



message
> The hand should be holding the twobyfour down.
> Might catch a thumb though....
>
> s
>
>
>
>>I suggest that you don't get too carried a way
>>cutting and drag that serrated knife across the back
>>of your hand. I have seen it happen.
>>
>
>


Posted by Steve Barker LT on October 2, 2007, 12:16 am
when you have a 12-14" knife stuck down through a slot in the plywood, it's
not likely it's gonna ride up on the twobyfour.

s


> True but I would never use anything like wood as a straight edge to cut
> against. I used only metal because a knife can catch in the wood and drag
> up and across the top of it. As I said, I have seen it happen.
>
>
>


Posted by Glenn on October 2, 2007, 12:02 pm
Whatever. [g]


message
> when you have a 12-14" knife stuck down through a
> slot in the plywood, it's not likely it's gonna ride
> up on the twobyfour.
>


Page 2 of 2       << first < 1 2
Similar ThreadsPosted
concrete cutting January 25, 2007, 7:22 am
Cutting PVC Pipe with Miter saw January 8, 2007, 5:02 pm
Cutting reinforced concrete posts July 15, 2006, 9:57 am
Cutting brick for window install? August 25, 2006, 7:28 pm
best saw for cutting bird's mouth cuts August 13, 2007, 8:45 am
cutting hole for steel chimney November 25, 2007, 4:10 pm
cedar shingle cutting jig for gable end sidewalls July 29, 2006, 6:08 pm
Cutting holes in engineered wood rim board? October 15, 2006, 11:18 am
cutting into cast iron waste stack March 25, 2007, 8:00 pm
Circular Blade for Cutting Both Wood and Metal May 4, 2008, 12:51 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap