Home Page link

Re: Large and cheap plywood near Coventry, RI

Building Construction - Building Construction Industry Discussions. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Re: Large and cheap plywood near Coventry, RI Don 12-13-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Don on December 13, 2007, 12:27 pm
"N Hurst"> wrote
>> From Craigslist:http://providence.craigslist.org/mat/507255077.html
>> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it for
>> $5.00 a sheet these are brand new not used if you figure the square
>> footage it equals just as much as 2 4x8 sheets put together you can
>> purchase as much or as little as you want delivery available call
>> rocky (401)269-9934
>>
>> Man, I wish I had a project for it and lived a bit nearer!
>>
>> R
>
> I could cover all the walls in my shop for less than $50 with that
> stuff... yeesh

If that stuff was close by, I'd scarf up about 100 sheets right now.
I'd finish out the shop interior and bank the rest.
Wonder how someone ends up with that much surplus of a special order
product?



Posted by J. Clarke on December 13, 2007, 1:24 pm
Don wrote:
> "N Hurst"> wrote
>>> From
>>> Craigslist:http://providence.craigslist.org/mat/507255077.html
>>> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it
>>> for
>>> $5.00 a sheet these are brand new not used if you figure the
>>> square
>>> footage it equals just as much as 2 4x8 sheets put together you
>>> can
>>> purchase as much or as little as you want delivery available call
>>> rocky (401)269-9934
>>>
>>> Man, I wish I had a project for it and lived a bit nearer!
>>>
>>> R
>>
>> I could cover all the walls in my shop for less than $50 with that
>> stuff... yeesh
>
> If that stuff was close by, I'd scarf up about 100 sheets right now.
> I'd finish out the shop interior and bank the rest.
> Wonder how someone ends up with that much surplus of a special order
> product?

Read the ad very carefully. The one here says "plywood" but the on
one Craigslist says "plywood" in the header and "particle board" in
the body. If it was plywood I'd be sorely tempted to rent a truck and
take a drive over, but for particle board, nahhh. . . .

--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)



Posted by Don on December 13, 2007, 3:14 pm

>> Don wrote:
>> > "N Hurst"> wrote
>> >>> From
>> >>> Craigslist:http://providence.craigslist.org/mat/507255077.html
>> >>> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it
>> >>> for
>> >>> $5.00 a sheet these are brand new not used if you figure the
>> >>> square
>> >>> footage it equals just as much as 2 4x8 sheets put together you
>> >>> can
>> >>> purchase as much or as little as you want delivery available call
>> >>> rocky (401)269-9934
>>
>> >>> Man, I wish I had a project for it and lived a bit nearer!
>>
>> >>> R
>>
>> >> I could cover all the walls in my shop for less than $50 with that
>> >> stuff... yeesh
>>
>> > If that stuff was close by, I'd scarf up about 100 sheets right now.
>> > I'd finish out the shop interior and bank the rest.
>> > Wonder how someone ends up with that much surplus of a special order
>> > product?
>>
>> Read the ad very carefully. The one here says "plywood" but the on
>> one Craigslist says "plywood" in the header and "particle board" in
>> the body. If it was plywood I'd be sorely tempted to rent a truck and
>> take a drive over, but for particle board, nahhh. . . .
>
> That's really odd - you're the second person to mention the particle
> board, but I just checked back and the listing still shows 5/8" 'thik'
> plywood - mentioned in the title and in the body of the listing.
> Probably worth a call for someone to verify. If I were building a
> house, I'd grab it for a nice upgrade/downprice for the roof and wall
> sheathing.

Ya'll talkin about 2 different ads?



Posted by J. Clarke on December 13, 2007, 4:14 pm
Don wrote:
>>> Don wrote:
>>>> "N Hurst"> wrote
>>>>>> From
>>>>>> Craigslist:http://providence.craigslist.org/mat/507255077.html
>>>>>> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it
>>>>>> for
>>>>>> $5.00 a sheet these are brand new not used if you figure the
>>>>>> square
>>>>>> footage it equals just as much as 2 4x8 sheets put together you
>>>>>> can
>>>>>> purchase as much or as little as you want delivery available
>>>>>> call
>>>>>> rocky (401)269-9934
>>>
>>>>>> Man, I wish I had a project for it and lived a bit nearer!
>>>
>>>>>> R
>>>
>>>>> I could cover all the walls in my shop for less than $50 with
>>>>> that
>>>>> stuff... yeesh
>>>
>>>> If that stuff was close by, I'd scarf up about 100 sheets right
>>>> now. I'd finish out the shop interior and bank the rest.
>>>> Wonder how someone ends up with that much surplus of a special
>>>> order product?
>>>
>>> Read the ad very carefully. The one here says "plywood" but the
>>> on
>>> one Craigslist says "plywood" in the header and "particle board"
>>> in
>>> the body. If it was plywood I'd be sorely tempted to rent a truck
>>> and take a drive over, but for particle board, nahhh. . . .
>>
>> That's really odd - you're the second person to mention the
>> particle
>> board, but I just checked back and the listing still shows 5/8"
>> 'thik' plywood - mentioned in the title and in the body of the
>> listing. Probably worth a call for someone to verify. If I were
>> building a house, I'd grab it for a nice upgrade/downprice for the
>> roof and wall sheathing.
>
> Ya'll talkin about 2 different ads?

Refresh the page. The one with "plywood" is probably cached in your
browser.

--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)



Similar ThreadsPosted
Re: Large and cheap plywood near Coventry, RI December 13, 2007, 1:30 pm
Re: Large and cheap plywood near Coventry, RI December 13, 2007, 3:10 pm
Cheap Plywood Arcata,CA September 21, 2006, 3:00 pm
Probable price increase for Chinese plywood/film faced plywood/blockboard, September,2007 August 22, 2007, 6:38 am
Refooting Large Building -Help February 11, 2007, 7:39 pm
Raising a large shed (20 x 24) January 31, 2008, 8:54 am
Cant Strip on outside of Large freezer - Where to buy? What to use? June 17, 2008, 11:22 am
closing a very deep and large pool December 20, 2006, 4:34 pm
How to Hang large extension ladder on Garage Wall? October 28, 2007, 10:47 am
Re: Plywood span November 15, 2006, 12:10 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap