Home Page link

Removing post in two car garage

Building Construction - Building Construction Industry Discussions. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Removing post in two car garage natootan 08-05-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on August 5, 2007, 11:04 pm
There is a post in our two car garage and I find it is a problem when
getting in and our of cars. For me it is a nuisance. Is there
anything I can do to remove it? What is involved?


Posted by RicodJour on August 5, 2007, 11:50 pm
On Aug 5, 11:04 pm, natoo...@gmail.com wrote:
> There is a post in our two car garage and I find it is a problem when
> getting in and our of cars. For me it is a nuisance. Is there
> anything I can do to remove it? What is involved?

Spending a fair bit of money to install a larger beam and possibly
reinforcing the foundation and supports at either end of the beam.
Another possibility is to calculate if the post can be relocated to a
position that interferes less with the car doors. It's still a fair
bit of work as a new footing has to be cut in through the slab and
most likely the post will only be able to moved a short distance
away. Still, it's another possibility.

R


Posted by Steve Barker on August 6, 2007, 10:14 am
Back the car in.


s


> There is a post in our two car garage and I find it is a problem when
> getting in and our of cars. For me it is a nuisance. Is there
> anything I can do to remove it? What is involved?
>



Posted by willshak on August 6, 2007, 10:43 am
on 8/5/2007 11:04 PM natootan@gmail.com said the following:
> There is a post in our two car garage and I find it is a problem when
> getting in and our of cars. For me it is a nuisance. Is there
> anything I can do to remove it? What is involved?
>
>

The post (lally column?) is there because the architect who designed the
house said it is needed because of the size and type of the girder that
the post supports. Removing the post may cause the girder to fail, or at
least sag. You should have an architect look at it and recommend any
changes needed, or if it can be done at all. More than likely it would
require the installation of a more stronger girder for the span.

--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Similar ThreadsPosted
Removing a Commerical Door October 5, 2006, 11:39 pm
Removing carpet under drywall November 22, 2006, 11:15 pm
best method for removing thinset? November 26, 2006, 9:05 pm
Removing framing around stairs February 19, 2007, 8:43 pm
Removing a 9' load bearing wall October 5, 2008, 4:39 am
Removing Basement wall, load bearing? January 28, 2008, 5:59 pm
Removing tree stumps or grind for under slab February 2, 2008, 8:30 pm
deck post ? September 25, 2006, 2:51 am
post protectors March 4, 2007, 2:19 pm
Post pounding through slough July 9, 2006, 7:45 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap