If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Dioclese on June 13, 2009, 9:11 am
I ran into a water softener unit that doesn't use salts in the process.
Rather, it uses a coiled wire around the piping. It touts rapidly changing
electrical frequency going through the wire. Supposedly, the calcium is
supposed to pass safely to the drain, rather than sticking to the piping and
hot water heater electrical elements.
This for real?
--
Dave
|
|
Posted by Matt Barrow on June 13, 2009, 9:16 pm
"Dioclese" <NONE> wrote in message
>I ran into a water softener unit that doesn't use salts in the process. Rather,
>it uses a coiled wire around the piping. It touts rapidly changing electrical
>frequency going through the wire. Supposedly, the calcium is supposed to pass
>safely to the drain, rather than sticking to the piping and hot water heater
>electrical elements.
> This for real?
It's real - really exepnsive. Not the sort of system you'll buy at Home Depot.
http://en.wikipedia.org/wiki/Ion_exchange
|
|
Posted by Warren Block on June 14, 2009, 11:15 am
Dioclese <NONE> wrote:
> I ran into a water softener unit that doesn't use salts in the process.
> Rather, it uses a coiled wire around the piping. It touts rapidly changing
> electrical frequency going through the wire. Supposedly, the calcium is
> supposed to pass safely to the drain, rather than sticking to the piping and
> hot water heater electrical elements.
> This for real?
http://www.chem1.com/CQ/aquacrack.html
--
Warren Block * Rapid City, South Dakota * USA
|
|
Posted by Dioclese on June 14, 2009, 11:07 pm
> Dioclese <NONE> wrote:
>> I ran into a water softener unit that doesn't use salts in the process.
>> Rather, it uses a coiled wire around the piping. It touts rapidly
>> changing
>> electrical frequency going through the wire. Supposedly, the calcium is
>> supposed to pass safely to the drain, rather than sticking to the piping
>> and
>> hot water heater electrical elements.
>> This for real?
> http://www.chem1.com/CQ/aquacrack.html
> --
> Warren Block * Rapid City, South Dakota * USA
Apparently, the author/writer is unsure about the type I'm asking about.
Here is an example:
http://www.equinox-products.com/HardnessMaster.htm
I planned on putting such in my wellhouse before it feeds the reservoir tank
and tees off to feed the house and garage. The operating temperature
eztremes for the device are borderline in winter and summer in the
wellhouse. Another outbuilding, adjacent to the house rear contains a 3
filter stage system. It cooler in the summer in there Guess that would be
the place to put it. That is, if it works.
--
Dave
|
|
Posted by Warren Block on June 15, 2009, 10:22 am
Dioclese <NONE> wrote:
>> Dioclese <NONE> wrote:
>>> I ran into a water softener unit that doesn't use salts in the process.
>>> Rather, it uses a coiled wire around the piping. It touts rapidly
>>> changing
>>> electrical frequency going through the wire. Supposedly, the calcium is
>>> supposed to pass safely to the drain, rather than sticking to the piping
>>> and
>>> hot water heater electrical elements.
>>> This for real?
>> http://www.chem1.com/CQ/aquacrack.html
> Apparently, the author/writer is unsure about the type I'm asking about.
> Here is an example:
> http://www.equinox-products.com/HardnessMaster.htm
http://www.chem1.com/CQ/aquacrack.html isn't my web page, just one that
seems to have a reasonable treatment of the subject.
The equipment discussed is the same type as the link, an electric coil
around a water pipe.
Google returns some interesting results for the HardnessMaster.
--
Warren Block * Rapid City, South Dakota * USA
|
Page 1 of 2 1 2 > last >>
| Similar Threads | Posted | | Water Trailers/Water Hauler/Water Buffalo/Water Transporter by Northland Products, Inc. | July 9, 2007, 3:25 pm |
| Water Trailers/Water Hauler/Water Buffalo by Northland Products | July 2, 2007, 4:06 pm |
| Water Trailers/Water Hauler/Water Buffalo by Northland Products, Inc. | July 5, 2007, 3:50 pm |
| Water Trailers - Water Hauler/Water Buffalo by Northland Products, Inc. | July 16, 2007, 4:34 pm |
| Water trailer for dust control, block/cement sawing, asphalt water, | July 2, 2007, 4:06 pm |
| Re: Basement water: Moving downspout water away from house to sistern | April 12, 2008, 8:38 pm |
| Re: Basement water: Moving downspout water away from house to sistern | May 3, 2008, 7:10 pm |
| Hot Water tank Anode rod and Water softner | June 9, 2007, 12:42 pm |
| Getting water up a hill | August 4, 2006, 9:39 pm |
| Water to my garage ? | August 8, 2006, 12:15 am |
|
|
>I ran into a water softener unit that doesn't use salts in the process. Rather,
>it uses a coiled wire around the piping. It touts rapidly changing electrical
>frequency going through the wire. Supposedly, the calcium is supposed to pass
>safely to the drain, rather than sticking to the piping and hot water heater
>electrical elements.
> This for real?