If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by willshak on October 6, 2007, 5:24 pm
X-posted to other relevant group.
Before there were concrete drill bits, or electric drills for that
matter, small round holes in concrete or rock were made by a round
chisel type tool that was pounded into the stone with a small sledge
hammer while turning the tool. It might have been 8" or 10" long. The
face of this chisel had a star-like pattern, only with 4 points, like a
plus sign " + ". I believe it was called a star drill.
A Google search brings up a lot of sports drills (training regimen).
Anyone know if they still make them, or if so, where to get one on-line?
I'm trying to drill some 40 - 3/4" holes in concrete and my 1/2" corded
electric drill with a concrete bit stalls on the stone aggregate in the
concrete requiring me to stop and try to crack the aggregate with a
large punch. I figured a star drill would work better.
--
Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @
|
|
Posted by George on October 6, 2007, 5:47 pm
willshak wrote:
> X-posted to other relevant group.
>
> Before there were concrete drill bits, or electric drills for that
> matter, small round holes in concrete or rock were made by a round
> chisel type tool that was pounded into the stone with a small sledge
> hammer while turning the tool. It might have been 8" or 10" long. The
> face of this chisel had a star-like pattern, only with 4 points, like a
> plus sign " + ". I believe it was called a star drill.
> A Google search brings up a lot of sports drills (training regimen).
> Anyone know if they still make them, or if so, where to get one on-line?
> I'm trying to drill some 40 - 3/4" holes in concrete and my 1/2" corded
> electric drill with a concrete bit stalls on the stone aggregate in the
> concrete requiring me to stop and try to crack the aggregate with a
> large punch. I figured a star drill would work better.
>
Thats what hammer drills are for and also the reason why star drills are
not so popular.
|
|
Posted by Glenn on October 6, 2007, 5:54 pm
Obviously you have never used a star drill.
Forget it. You will use the electric drill only, after
about 15 min of pounding on the star drill. Maybe you
are pushing it too hard. I usually drilled a 1/4" hole
and then drilled it out bigger with the 1/2" or
whatever.
> X-posted to other relevant group.
> Before there were concrete drill bits, or electric
> drills for that matter, small round holes in concrete
> or rock were made by a round chisel type tool that
> was pounded into the stone with a small sledge hammer
> while turning the tool. It might have been 8" or 10"
> long. The face of this chisel had a star-like
> pattern, only with 4 points, like a plus sign " + ".
> I believe it was called a star drill.
> A Google search brings up a lot of sports drills
> (training regimen).
> Anyone know if they still make them, or if so, where
> to get one on-line?
> I'm trying to drill some 40 - 3/4" holes in concrete
> and my 1/2" corded electric drill with a concrete bit
> stalls on the stone aggregate in the concrete
> requiring me to stop and try to crack the aggregate
> with a large punch. I figured a star drill would work
> better.
> --
> Bill
> In Hamptonburgh, NY
> To email, remove the double zeroes after @
|
|
Posted by willshak on October 6, 2007, 7:27 pm
on 10/6/2007 5:54 PM Glenn said the following:
> Obviously you have never used a star drill.
Obviously, you don't know anything about me.
> Forget it. You will use the electric drill only, after about 15 min
> of pounding on the star drill. Maybe you are pushing it too hard. I
> usually drilled a 1/4" hole and then drilled it out bigger with the
> 1/2" or whatever.
>> X-posted to other relevant group.
>> Before there were concrete drill bits, or electric drills for that
>> matter, small round holes in concrete or rock were made by a round
>> chisel type tool that was pounded into the stone with a small sledge
>> hammer while turning the tool. It might have been 8" or 10" long. The
>> face of this chisel had a star-like pattern, only with 4 points, like
>> a plus sign " + ". I believe it was called a star drill.
>> A Google search brings up a lot of sports drills (training regimen).
>> Anyone know if they still make them, or if so, where to get one on-line?
>> I'm trying to drill some 40 - 3/4" holes in concrete and my 1/2"
>> corded electric drill with a concrete bit stalls on the stone
>> aggregate in the concrete requiring me to stop and try to crack the
>> aggregate with a large punch. I figured a star drill would work better.
>> --
>> Bill
>> In Hamptonburgh, NY
>> To email, remove the double zeroes after @
--
Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @
|
|
Posted by PeterD on October 6, 2007, 6:05 pm
wrote:
>X-posted to other relevant group.
>Before there were concrete drill bits, or electric drills for that
>matter, small round holes in concrete or rock were made by a round
>chisel type tool that was pounded into the stone with a small sledge
>hammer while turning the tool. It might have been 8" or 10" long. The
>face of this chisel had a star-like pattern, only with 4 points, like a
>plus sign " + ". I believe it was called a star drill.
>A Google search brings up a lot of sports drills (training regimen).
>Anyone know if they still make them, or if so, where to get one on-line?
>I'm trying to drill some 40 - 3/4" holes in concrete and my 1/2" corded
>electric drill with a concrete bit stalls on the stone aggregate in the
>concrete requiring me to stop and try to crack the aggregate with a
>large punch. I figured a star drill would work better.
I'm 100% sure they are available, but I really don't think many 1/2"
corded drills will do much for you.
These are impact, so you need an impact tool.
I use an IR tool that uses star bits, works nicely (but is air
powered!) I know you can rent electric ones (or buy, but they are
expensive).
But using a star drill in a standard drill won't do you any good,
you'll never really make a hole--you have to have impact. BTW, with my
IR tool, I provide the rotating force, the tool only provides the
impact. And if I don't provide rotational force, things get very
strange after a short while! (I usualy do a continous 90 degree
rotation back and forth as I'm drilling...)
And, yes, the star drill will work better. I punch 3/4" holes about
three inches deep in about a minute or so per hole.
Try a tool rental place. Tell them what you need, they will have
something to do it.
|
Page 1 of 15 1 2 3 > last >>
| Similar Threads | Posted | | Integral drill rod and tapered drill rod | August 14, 2006, 10:54 pm |
| Premier Home Builders/USA Five Star Homes LP in Little Elm, TX | May 22, 2007, 1:59 pm |
| Former Head of 'Star Wars' Program says 9/11 an Inside Job | May 1, 2006, 4:06 am |
| Re: Ryobi Cordless Drill Charger | May 8, 2007, 1:36 pm |
| Air leg rock drill and quarryin & mining tools | August 14, 2006, 10:56 pm |
| cordless drill batteries - Milwaukee recall | October 23, 2007, 12:53 pm |
| Bosch cordless hammer drill, unbelievably cheap! | November 2, 2008, 10:23 pm |
| Need a good cheap hand-held drill guide (mostly for 90° drilling) | October 22, 2007, 6:13 pm |
| 5 star Hotel,office Tower,luxurious house Development Land For sale in Istanbul Turkey | October 19, 2007, 9:00 am |
|
|
>
> Before there were concrete drill bits, or electric drills for that
> matter, small round holes in concrete or rock were made by a round
> chisel type tool that was pounded into the stone with a small sledge
> hammer while turning the tool. It might have been 8" or 10" long. The
> face of this chisel had a star-like pattern, only with 4 points, like a
> plus sign " + ". I believe it was called a star drill.
> A Google search brings up a lot of sports drills (training regimen).
> Anyone know if they still make them, or if so, where to get one on-line?
> I'm trying to drill some 40 - 3/4" holes in concrete and my 1/2" corded
> electric drill with a concrete bit stalls on the stone aggregate in the
> concrete requiring me to stop and try to crack the aggregate with a
> large punch. I figured a star drill would work better.
>