Stroke of genius or another flop?

Posted by Dioclese on December 28, 2008, 5:49 am

Off and on, I've been contemplating how to construct a skirt for a pier and
beam house. House has horizontal lap siding from James Hardie. First
bottom lap is against the framing. And, how to do it inexpensively and with
minimum effort. One man job.

I've already constructed an entry door for the underside of the house and
framed in between 2 piers with PT lumber.

My latest idea is to pour a slab for a frame to reside on between each pier.
Frame that in and batt insulate. Picture frame the framing with James
Hardie 1X4s. Apply lap siding as normal inside the picture frame and use
suitable caulk. Paint as instructed by Hardie website. Leave piers exposed
between and use paint on them normally used on interior basement walls.

Am I forgetting something?
--
Dave

Posted by PeterD on December 28, 2008, 9:46 am

On Sun, 28 Dec 2008 04:49:01 -0600, "Dioclese" <NONE> wrote:

>Off and on, I've been contemplating how to construct a skirt for a pier and
>beam house. House has horizontal lap siding from James Hardie. First
>bottom lap is against the framing. And, how to do it inexpensively and with
>minimum effort. One man job.
>I've already constructed an entry door for the underside of the house and
>framed in between 2 piers with PT lumber.
>My latest idea is to pour a slab for a frame to reside on between each pier.
>Frame that in and batt insulate. Picture frame the framing with James
>Hardie 1X4s. Apply lap siding as normal inside the picture frame and use
>suitable caulk. Paint as instructed by Hardie website. Leave piers exposed
>between and use paint on them normally used on interior basement walls.
>Am I forgetting something?

Perhaps like the location? <g> That would make a difference, IMHO.

Posted by Dioclese on December 29, 2008, 6:47 am

> On Sun, 28 Dec 2008 04:49:01 -0600, "Dioclese" <NONE> wrote:

>>Off and on, I've been contemplating how to construct a skirt for a pier
>>and
>>beam house. House has horizontal lap siding from James Hardie. First
>>bottom lap is against the framing. And, how to do it inexpensively and
>>with
>>minimum effort. One man job.
>>I've already constructed an entry door for the underside of the house and
>>framed in between 2 piers with PT lumber.
>>My latest idea is to pour a slab for a frame to reside on between each
>>pier.
>>Frame that in and batt insulate. Picture frame the framing with James
>>Hardie 1X4s. Apply lap siding as normal inside the picture frame and use
>>suitable caulk. Paint as instructed by Hardie website. Leave piers
>>exposed
>>between and use paint on them normally used on interior basement walls.
>>Am I forgetting something?

> Perhaps like the location? <g> That would make a difference, IMHO.

Growing zone 8A, rural central TX.
Also important, I guess, is the fact the house is built on a side of hill.
8" clearance to subfloor rear, varies between 3.5' and 4' in the front.
Rear yard has been landscaped to divert rain runoff around the house.
Intend to stairstep on the sides of the house.

No municipal inspections regarding home building in the area. County does
do new septic installation inspections. My home meets IRC building
standards as most custom homes do around here.
--
Dave