If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by on September 4, 2007, 8:06 pm
I need to install a vanity top between two walls 37 3/4" apart. The
closest vanity top I can find is 37". I was thinking of just getting a
wider one and cutting it down but thought I might try to find some
other possible solutions first. Any suggestions are appreciated.
Thanks in advance.
K
|
|
Posted by CWatters on September 5, 2007, 10:13 am
> I need to install a vanity top between two walls 37 3/4" apart. The
> closest vanity top I can find is 37". I was thinking of just getting a
> wider one and cutting it down but thought I might try to find some
> other possible solutions first. Any suggestions are appreciated.
> Thanks in advance.
> K
>
What sort of vanity top? Granite or marble? Plastic?
|
|
Posted by CWatters on September 5, 2007, 10:14 am
> I need to install a vanity top between two walls 37 3/4" apart. The
> closest vanity top I can find is 37". I was thinking of just getting a
> wider one and cutting it down but thought I might try to find some
> other possible solutions first. Any suggestions are appreciated.
> Thanks in advance.
> K
>
Will you be tiling the walls after fitting? They may fill the 3/4".
|
|
Posted by willshak on September 5, 2007, 11:08 am
on 9/4/2007 8:06 PM geo.nova@hotmail.com said the following:
> I need to install a vanity top between two walls 37 3/4" apart. The
> closest vanity top I can find is 37". I was thinking of just getting a
> wider one and cutting it down but thought I might try to find some
> other possible solutions first. Any suggestions are appreciated.
> Thanks in advance.
> K
>
>
What is the material of the vanity top?
What is on the walls that the top will butt up against? Wallboard, Tile,
or other?
I was kinda confused when you said 'a wider one'. I think you meant a
longer one.
--
Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @
|
|
Posted by HerHusband on September 6, 2007, 10:46 am
> I need to install a vanity top between two walls 37 3/4" apart. The
> closest vanity top I can find is 37". I was thinking of just getting a
> wider one and cutting it down but thought I might try to find some
> other possible solutions first. Any suggestions are appreciated.
If you can't find a ready-made top to fit the available space, you'll have
to create a custom top.
You could use the 37" vanity and add 3/8" splash panels or trim on each
end.
You could cut a plywood top to fit and apply your choice of sink and
laminate (this is what we chose for our bathroom sinks).
You could have a counter custom cut out of marble, granite, corian, or some
other solid surface material.
You could build up a base and tile the counter top before installing a
sink.
You could even have custom concrete counters installed.
Anthony
|
| Similar Threads | Posted | | Manufacturer granite Countertops, marble bowed Bathroom Vanity , table tops, Island tops, Vanity Cabinet, Counter tops, kitchen worktops ,Custom Marble Mantels, Vanity tops are widely used for hotel,public area bathroom, restroom, apartment, villa,gues | December 2, 2007, 4:39 am |
| Truss Calculations again...different issue | August 12, 2006, 3:16 am |
| retaining wall issue | March 19, 2008, 4:26 pm |
| Quality issue with LVL header in basement? | December 28, 2006, 10:45 pm |
| Concrete guy with issue has an Asphalt question from you experts | April 19, 2008, 10:02 am |
| Hardieplank siding installation | August 18, 2006, 5:51 pm |
| Fiberglass bathtub Installation | November 25, 2006, 11:41 pm |
| flitch beam installation | January 30, 2007, 8:26 am |
| installation of pavers - would like advice | February 6, 2007, 7:51 pm |
| Lyptus hardwood floor installation | September 24, 2006, 3:32 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap