If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by rj on November 1, 2006, 4:05 pm
What, if any masonry products are considered non-porous? I assume CMU is
*not* non-porous.
Thanks in advance for sharing your knowledge.
|
|
Posted by Robert Allison on November 1, 2006, 4:19 pm
rj wrote:
> What, if any masonry products are considered non-porous? I assume CMU is
> *not* non-porous.
>
> Thanks in advance for sharing your knowledge.
>
>
Hard fired brick, some ceramic tiles, some types of marble,
granite, smooth concrete that has been sealed, some types of
masonry finishes, such as epoxy coatings, etc.
--
Robert Allison
Rimshot, Inc.
Georgetown, TX
|
|
Posted by RicodJour on November 1, 2006, 4:22 pm
Robert Allison wrote:
> rj wrote:
> > What, if any masonry products are considered non-porous? I assume CMU is
> > *not* non-porous.
> >
> > Thanks in advance for sharing your knowledge.
> >
>
> Hard fired brick, some ceramic tiles, some types of marble,
> granite, smooth concrete that has been sealed, some types of
> masonry finishes, such as epoxy coatings, etc.
You're so literal! I thought he was asking about mortar and concrete
mix that had hardened in the bag. :)
R
|
|
Posted by rj on November 1, 2006, 4:57 pm
Rolling on the floor ;-)
> Robert Allison wrote:
> > rj wrote:
> > > What, if any masonry products are considered non-porous? I assume CMU
is
> > > *not* non-porous.
> > >
> > > Thanks in advance for sharing your knowledge.
> > >
> >
> > Hard fired brick, some ceramic tiles, some types of marble,
> > granite, smooth concrete that has been sealed, some types of
> > masonry finishes, such as epoxy coatings, etc.
>
> You're so literal! I thought he was asking about mortar and concrete
> mix that had hardened in the bag. :)
>
> R
>
|
|
Posted by Robert Allison on November 1, 2006, 5:23 pm
RicodJour wrote:
> Robert Allison wrote:
>
>>rj wrote:
>>
>>>What, if any masonry products are considered non-porous? I assume CMU is
>>>*not* non-porous.
>>>
>>>Thanks in advance for sharing your knowledge.
>>>
>>
>>Hard fired brick, some ceramic tiles, some types of marble,
>>granite, smooth concrete that has been sealed, some types of
>>masonry finishes, such as epoxy coatings, etc.
>
>
> You're so literal! I thought he was asking about mortar and concrete
> mix that had hardened in the bag. :)
>
> R
>
Now that was funny!
--
Robert Allison
Rimshot, Inc.
Georgetown, TX
|
| Similar Threads | Posted | | Masonry Website Update | July 13, 2006, 5:40 pm |
| masonry, how to handle CMU T-intersections | September 3, 2006, 1:54 am |
| Tyvek on Masonry Interior? | September 22, 2007, 8:22 am |
| Masonry Stain Dyebrick | March 10, 2008, 9:16 pm |
| masonry: question about brick repair | September 3, 2006, 9:47 am |
| Brick Staining & Masonry Resurfacing | February 11, 2007, 12:24 am |
| Brick Staining & Masonry Resurfacing | February 11, 2007, 12:25 am |
| Exterior Masonry Wall Construction | September 19, 2007, 6:58 am |
| masonry contractor weird conversation | July 20, 2008, 9:54 am |
| plaster finish on a masonry heater. | July 28, 2008, 6:56 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap