Home Page link

Working with PVC pipe - Page 3

Building Construction - Building Construction Industry Discussions. 

Page 3 of 3       << first < 1 2 3 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Working with PVC pipe James 07-28-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by CWatters on July 28, 2006, 6:07 pm

> Hello,
> I had some PVC pipe left over from a project and my kids discovered it was
> fun to play with. Having cut it into a few segments and smoothed up the
> ends, I also had a spare T joint which I gave up.
> It is a real hit,

Humm there's an idea. Lots of short lengths of pipe, some branches, forks
etc ...and a bag of marbles or ping pong balls.



Posted by HeyBub on July 28, 2006, 9:27 pm
CWatters wrote:
>> Hello,
>> I had some PVC pipe left over from a project and my kids discovered
>> it was fun to play with. Having cut it into a few segments and
>> smoothed up the ends, I also had a spare T joint which I gave up.
>> It is a real hit,
> Humm there's an idea. Lots of short lengths of pipe, some branches,
> forks etc ...and a bag of marbles or ping pong balls.

Google for "marshmallow gun" for even more fun.



Posted by Judanne on July 30, 2006, 1:22 am
Or you and the kids could have a lot of fun by downloading free plans from
here
http://www.pvcworkshop.com/index.htm

Judanne

Humm there's an idea. Lots of short lengths of pipe, some branches,
forks etc ...and a bag of marbles or ping pong balls.

Google for "marshmallow gun" for even more fun.



Page 3 of 3       << first < 1 2 3
Similar ThreadsPosted
What is it with working on your own house? March 13, 2007, 9:32 pm
Garage Door Opener Not Working June 29, 2009, 1:02 pm
Working Smart with Web-based Project Management October 26, 2006, 12:26 pm
Radiant Heat - Boiler Working Overtime? December 30, 2006, 1:41 pm
Re: scissor lift working on carpet surface November 19, 2007, 9:40 pm
general question about working with a remodeling company July 17, 2008, 4:11 am
Check Wind direction for working outside monitor August 23, 2008, 11:12 am
Double Pole Circuit Breaker Not working April 13, 2009, 7:11 pm
Steel hurricane panel working drawings? May 9, 2009, 7:19 am
Online Restoration Conference, Windows & Working Lead-Safe August 30, 2006, 2:49 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap