Home Page link

laser level reliability

Home| Search | About
Login Password
Register Now! Lost Password?

Building Construction - Building Construction Industry Discussions. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
laser level reliability tonyg 08-03-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by tonyg on August 3, 2006, 9:57 pm
Hello, Do you use laser levels and worry about accuracy. I mean on any
given day it could be out of calibration and your work at say 40 feet
away is not gonna be right. I just tested mine tonite against a sight
level and at 58 each way feet its off by almost an inch. I will be
resetting a lot of form panels tomorrow. But I just can't see the
value in keeping a tool that could be wrong any time. Other than having
it calibrated every other month whats a fella to do? tonyg


Posted by RicodJour on August 4, 2006, 12:39 am
tonyg wrote:
> Hello, Do you use laser levels and worry about accuracy. I mean on any
> given day it could be out of calibration and your work at say 40 feet
> away is not gonna be right. I just tested mine tonite against a sight
> level and at 58 each way feet its off by almost an inch. I will be
> resetting a lot of form panels tomorrow. But I just can't see the
> value in keeping a tool that could be wrong any time. Other than having
> it calibrated every other month whats a fella to do?

None of my lasers cost more than $300 and the accuracy is fine. If the
laser won't hold its calibration and you're worried about the accuracy
day to day buy a new one. Other than that, if you handle a quality
laser with care and check it against a water level every couple of
weeks or so, it's unlikely that you'll have problems. If greater than
usual accuracy is required, or greater distances involved, I still go
with a water level, particularly for things such as formwork.

R


Posted by marson on August 4, 2006, 7:14 am

> tonyg wrote:
> > Hello, Do you use laser levels and worry about accuracy. I mean on any
> > given day it could be out of calibration and your work at say 40 feet
> > away is not gonna be right. I just tested mine tonite against a sight
> > level and at 58 each way feet its off by almost an inch. I will be
> > resetting a lot of form panels tomorrow. But I just can't see the
> > value in keeping a tool that could be wrong any time. Other than having
> > it calibrated every other month whats a fella to do?
>
i say a laser should be accurate to 1/4" in 50 feet or whatever the
manufacturer says or it is defective and not worth a damn. if possible,
i periodically check forms or whatever with my 6 foot level to see if
my laser is working. somehow i trust a bubble i can see more than an
unseen internal mechanism, especially since i once had a Robotoolz
laser that started drooping. wound up with a foundation wall with a
corner that was an inch low as a result. never trusted it after that.
sent it back to the company and they just sent it back to me without
doing anything to it.


Posted by bill allemann on August 8, 2006, 11:22 am
some levels can/should be calibrated on occasion. How often depends on how
the unit was treated in storage and transport.
If it is a cheap one with no calibration, you would probably need a new one.
By the way, I've tried 4 cheaper self leveling ones last year, and none was
accurate enough.
On the other hand I have a manual torpedo style ( ten bucks) that is
extremely accurate.
You just have to try them out against a water level.

Bill



> Hello, Do you use laser levels and worry about accuracy. I mean on any
> given day it could be out of calibration and your work at say 40 feet
> away is not gonna be right. I just tested mine tonite against a sight
> level and at 58 each way feet its off by almost an inch. I will be
> resetting a lot of form panels tomorrow. But I just can't see the
> value in keeping a tool that could be wrong any time. Other than having
> it calibrated every other month whats a fella to do? tonyg
>
>



Posted by JerryD\(upstateNY\) on August 8, 2006, 7:44 pm
> You just have to try them out against a water level.

Let me tell you about my water level that didn't read level.

To aid seeing the water, I mixed some anti-freeze with it before I poured it
into the tubing.
I didn't have enough water to fill the tubing so I mixed up some more and
filled the tubing.
The first time I used it, I was showing my daughter how it worked.
In the process of showing her, I noticed that it was reading true.
When holding the 2 ends together, the water in one end was higher than the
water in the other end.
It took me a while to figure it out.
When I mixed the second batch of water/anti-freeze, I used more anti-freeze
than the first batch.
Part of the water was heavier than the other part.

--
JerryD(upstateNY)



Similar ThreadsPosted
Sweet deal on PLS1 laser distance measurer September 8, 2006, 9:50 pm
Level Plywood Subfloor July 8, 2006, 2:22 am
Raising level of deck July 20, 2007, 3:51 pm
Getting the step down living room up to the floor level September 8, 2006, 11:16 pm
Urgent need of top level Building Construction expats for India January 24, 2007, 12:04 am
Water in my unfinished basement walls that are above ground level. February 19, 2007, 1:18 pm
Framing Roof Joists for Addition when top Plate is not Level February 20, 2007, 3:07 pm
Shortening cement piers in order to level house October 18, 2007, 7:37 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap