|
Posted by Cwatters on February 2, 2009, 2:27 pm
> how to carry out a dynamic water pressure test
> -------------------------------------
On the end of the pipe fit a pressure guage and a full bore valve. Adjust
the valve until you achieve the required flow rate in L/Min. Record the
pressure.
You could actually plot a graph of flow rate vs pressure....
With zero flow (eg valve closed ) you are measuring the static pressure.
With valve fully open you will measure close to the "zero" pressure maximium
flow rate.
Plot several points in between.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> -------------------------------------