Home Page link

questions to ask about pool replaster

Building Construction - Building Construction Industry Discussions. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
questions to ask about pool replaster consumer@yahoo.com 10-05-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by consumer@yahoo.com on October 5, 2006, 3:55 pm
I am currently in the process of having a deck built, and feeling
screwed by the contractor adding all kinds of expenses for
"unanticipated" problems (He charged me extra for flashing which
everyone I have asked has told me is standard construction technique,
and two extra hours labor for "inspecting" the wood). I am now
planning to get my pool and attached spa replastered, and have the
tile redone, and have the cool deck (sp?) painted with "restorer." He
will also replace the pool ladder, light.

What questions should I be asking (assuming his references are good)
about the job. I know that he says he will sandblast but do all
sandblasts go down to the concrete, or only part way down. I really am

ignorant about this (just I was ignorant about the deck) , but I guess
I need to be educated to know what properly should be done for this job

in case the contractor tries to tell me something is "extra." Do most
contractors charge a set fee for such a job, and are there any
conditions which reasonably could cause "unanticipated" extra expenses

(The pool has NO cracks whatsoever). What shortcuts would contractors
attempt that I should be on the lookout for. He gave me a bid of
$11,200 for my 20K gallon pool, and it was similar (next to the low
bid) to other bids for the same work. He did have a good reference
from a trusted contractor.


My existing cool deck has some limited areas which are cracked, and
have come off from the concrete slab. Also, some of the concrete slab
was jack hammered up for construction of the deck. How should this be
taken care of, since I assume that either new cool deck or more
concrete must be poured to make the pool deck surface uniform.


Posted by Kickstart on October 5, 2006, 7:07 pm

> screwed by the contractor adding all kinds of expenses for
> "unanticipated" problems

> What questions should I be asking (assuming his references are good)
> about the job. I know that he says he will sandblast but do all
> sandblasts go down to the concrete, or only part way down.

> I need to be educated to know what properly should be done for this job
>
> in case the contractor tries to tell me something is "extra."

> conditions which reasonably could cause "unanticipated" extra expenses
>
> (The pool has NO cracks whatsoever). What shortcuts would contractors
> attempt that I should be on the lookout for.

He did have a good reference
> from a trusted contractor.

IF YOU DON'T TRUST THE GUY DON'T HIRE HIM.
What makes you think he is a crook, because he is a contractor ?
Why would a guy that gave you a good price try to cheat you ?
If he runs into some unforeseen problems, should he fix them for free ?

You say he has references and was recommended by a trusted contractor, so
why look for problems ?
I think you are likely to cause your own problems and then you can say it
was because the guy was cheating you. That way you end up being right.....
again .... from your posted experiences it wont be the first or last time.


kickstart



Posted by consumer@yahoo.com on October 5, 2006, 7:56 pm

Kickstart wrote:
> > screwed by the contractor adding all kinds of expenses for
> > "unanticipated" problems
>
> > What questions should I be asking (assuming his references are good)
> > about the job. I know that he says he will sandblast but do all
> > sandblasts go down to the concrete, or only part way down.
>
> > I need to be educated to know what properly should be done for this job
> >
> > in case the contractor tries to tell me something is "extra."
>
> > conditions which reasonably could cause "unanticipated" extra expenses
> >
> > (The pool has NO cracks whatsoever). What shortcuts would contractors
> > attempt that I should be on the lookout for.
>
> He did have a good reference
> > from a trusted contractor.
>
> IF YOU DON'T TRUST THE GUY DON'T HIRE HIM.
> What makes you think he is a crook, because he is a contractor ?
> Why would a guy that gave you a good price try to cheat you ?
> If he runs into some unforeseen problems, should he fix them for free ?
>
> You say he has references and was recommended by a trusted contractor, so
> why look for problems ?
> I think you are likely to cause your own problems and then you can say it
> was because the guy was cheating you. That way you end up being right.....
> again .... from your posted experiences it wont be the first or last time.
>
>
> kickstart

1) I did not say that all contractors are crooks, nor did I imply that.
2) Who said that he gave me a good price?
3) Is putting flashing on a deck an unanticipated step in construction
of a deck? Indeed I posted this question on decks.com and the
professional deck-building moderator did indeed believe that this is a
standard step in deck construction. Two other local contractors also
agreed that putting flashing on the deck was standard. Finally, when I
went out and looked at the other deck on my house, it too had flashing,
which was not charged as an "extra."
4) Finally I have paid every cent the contractor billed for "extras"
even though from what I can determine, such extras should not be
charged as extras.

Thank you


Similar ThreadsPosted
deck around pool April 23, 2007, 10:33 pm
Above ground pool on garage pad. July 5, 2006, 5:30 pm
Building a Swimming Pool February 12, 2007, 11:50 am
Building a Swimming Pool February 12, 2007, 2:00 pm
closing a very deep and large pool December 20, 2006, 4:34 pm
Clear Pool Wall Design April 10, 2007, 7:04 am
Ozone Generator for Swimming Pool November 25, 2007, 5:02 pm
Pool Ozone Generator Run Time December 20, 2007, 1:43 am
Greenhouse Swimming Pool Enclosure June 1, 2008, 1:39 pm
Filling concrete joints in pool area July 14, 2007, 9:54 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap