Home Page link

vinyl siding cost

Home| Search | About
Login Password
Register Now! Lost Password?

Building Construction - Building Construction Industry Discussions. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
vinyl siding cost Nitestarz 09-27-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Nitestarz on September 27, 2006, 8:12 am
OK, about home much(not looking for exact numbers) would it cost to
side a $2000 sq ft house?

I live in NH.

Thanks!
Jody


Posted by longshot on September 27, 2006, 9:03 am

> OK, about home much(not looking for exact numbers) would it cost to
> side a $2000 sq ft house?

assuming there's no tear off or prep work req'd , you could do it yourself
for about a grand. start adding blue board insulation, furring, plan on
retrimming the whole house you could have a contractor do it for about 50k.
quite a differnce, eh?




Posted by Mike on September 27, 2006, 8:51 pm

>
>> OK, about home much(not looking for exact numbers) would it cost to
>> side a $2000 sq ft house?
>
> assuming there's no tear off or prep work req'd , you could do it yourself
> for about a grand. start adding blue board insulation, furring, plan on
> retrimming the whole house you could have a contractor do it for about
> 50k. quite a differnce, eh?
$50,000??? That sounds a little much....



Posted by longshot on September 28, 2006, 6:11 am

>
>>
>>> OK, about home much(not looking for exact numbers) would it cost to
>>> side a $2000 sq ft house?
>>
>> assuming there's no tear off or prep work req'd , you could do it
>> yourself for about a grand. start adding blue board insulation, furring,
>> plan on retrimming the whole house you could have a contractor do it for
>> about 50k. quite a differnce, eh?
> $50,000??? That sounds a little much....

I am talking about trimming out the whole house because you added insulation
& furring between the old siding & the new. That number isn't as exaggerated
as you may think for a 2000 sq ft house



Posted by JASON on September 27, 2006, 7:34 pm
I am a vinyl siding contractor in Indianapolis, IN and these are the
going rates for this area. Siding is priced as a square unit (100 sq.
ft). So 2000 sq ft. would be 20 squares. I generally charge 285 dollars
per square (average). This includes all materials, including foam
underlayment, and labor. So your looking at about 5700 bucks if your
house was in the midwest and is a relatively normal job.

Jason


Similar ThreadsPosted
Re: Vinyl Siding labor cost? June 28, 2008, 8:43 pm
Vinyl siding, which foam board to use? September 7, 2006, 4:04 am
Re: Use house-wrap under vinyl siding? June 28, 2008, 8:45 pm
Outisde attic access w/vinyl siding July 21, 2006, 8:59 pm
Aluminum Screen Enclosure - Vinyl Lap Siding April 10, 2007, 7:47 am
remove masking tape from vinyl siding? October 30, 2007, 11:17 am
replace vinyl siding with stucco in flat roof building? January 26, 2007, 12:08 pm
Vinyl Flooring Best For Pets? July 9, 2006, 8:09 pm
vinyl compostion tiles August 22, 2007, 10:11 pm
Just 2" frame for vinyl window in concrete? July 18, 2007, 3:46 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap