Home Page link

A/C replacement unit, Freon or R410A?

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 3 of 4       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
A/C replacement unit, Freon or R410A? momq's 07-16-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Bubba on July 31, 2007, 10:53 pm

>My opinion to momq's
>
>
>> momq's wrote:
>>> Our 12 year old 3 ton Lennox 10AC series Air conditioner compressor is
>>> broken. Our HVAC guy and Armstrong dealer, thinks we should install
>>> an Armstrong 213LE unit, 13 Seer, that uses freon, and replace the
>>> evaporator coil for the 13 Seer efficiency. We're thinking to replace
>>> it with a unit that uses the new R410A aka Puron.
>>> Four questions:
>>> 1. Does anyone know anything about Armstrong Air conditioners,
>>> especially the newer ones that use R410A?
>
>Personally I don't know however basic of refrigeration does not change

"...don't know..." and that's exactly why you need to stop here, shut
the fuck up and quit advising people about hvac installs and repairs
when you have absolutely NO qualifications whatsoever as you have
plainly informed us all of.
Bubba
>
>>> 2. Are the R410A type units any more complicated regarding
>>> maintenance?
>
>
>Not really however they do run with much higher pressures
>and are much more expansive to repair.
>
>
>>> 3. Since we are in the midwest where we only use the air conditioner
>>> about 2.5 months a year, should we buy the minimum 13 Seer or go up
>>> any higher in efficiency?
>
>If you are to purchase new one I guess it would make sense more efficient
>one.
>
>
>>> 4.. We were just told that in addition to the evaporator coil, we
>>> are now going to have to replace the copper pipe leading from the
>>> furnace to the air conditioner because it previously had freon in it.
>
>Incorrect if in good shape piping is unnecessary to change
>
>
>>> Is this really necessary, and if we don't do it, will it cancel out
>>> the warranty?
>
>Not necessarily that depend on your installer
>
>
>>> We have overnight guests coming and its really hot upstairs. Please
>>> help!
>>>
>> What does she look like? Maybe you can sweat her out of her clothes! Just
>> tell her it's too hot for clothes. Of course if you have or take any pix
>> they must be posted here.
>

Posted by Tony on July 31, 2007, 11:15 pm

>
>>My opinion to momq's
>>
>>
>>> momq's wrote:
>>>> Our 12 year old 3 ton Lennox 10AC series Air conditioner compressor is
>>>> broken. Our HVAC guy and Armstrong dealer, thinks we should install
>>>> an Armstrong 213LE unit, 13 Seer, that uses freon, and replace the
>>>> evaporator coil for the 13 Seer efficiency. We're thinking to replace
>>>> it with a unit that uses the new R410A aka Puron.
>>>> Four questions:
>>>> 1. Does anyone know anything about Armstrong Air conditioners,
>>>> especially the newer ones that use R410A?
>>
>>Personally I don't know however basic of refrigeration does not change
>
> "...don't know..." and that's exactly why you need to stop here, shut
> the fuck up and quit advising people about hvac installs and repairs
> when you have absolutely NO qualifications whatsoever as you have
> plainly informed us all of.
> Bubba
>>

Hello BUbba are you having problems I am sorry
I am sure you will have better days but then again if you
have some and I say some qualifications you would not have
any problems wouldn't you.
Tony



>>>> 2. Are the R410A type units any more complicated regarding
>>>> maintenance?
>>
>>
>>Not really however they do run with much higher pressures
>>and are much more expansive to repair.
>>
>>
>>>> 3. Since we are in the midwest where we only use the air conditioner
>>>> about 2.5 months a year, should we buy the minimum 13 Seer or go up
>>>> any higher in efficiency?
>>
>>If you are to purchase new one I guess it would make sense more efficient
>>one.
>>
>>
>>>> 4.. We were just told that in addition to the evaporator coil, we
>>>> are now going to have to replace the copper pipe leading from the
>>>> furnace to the air conditioner because it previously had freon in it.
>>
>>Incorrect if in good shape piping is unnecessary to change
>>
>>
>>>> Is this really necessary, and if we don't do it, will it cancel out
>>>> the warranty?
>>
>>Not necessarily that depend on your installer
>>
>>
>>>> We have overnight guests coming and its really hot upstairs. Please
>>>> help!
>>>>
>>> What does she look like? Maybe you can sweat her out of her clothes!
>>> Just
>>> tell her it's too hot for clothes. Of course if you have or take any
>>> pix
>>> they must be posted here.
>>



Posted by Bill on August 1, 2007, 12:37 am
wrote:

> Hello BUbba are you having problems I am sorry
> I am sure you will have better days but then again if you
> have some and I say some qualifications you would not have
> any problems wouldn't you.
> Tony

I thought the inconsistent misspellings was retarded and an act.

You must be the retarded version of weasel.

--
http://michellemalkin.com/

Posted by Tony on August 1, 2007, 12:05 pm
I love you to


> wrote:
>
>> Hello BUbba are you having problems I am sorry
>> I am sure you will have better days but then again if you
>> have some and I say some qualifications you would not have
>> any problems wouldn't you.
>> Tony
>
> I thought the inconsistent misspellings was retarded and an act.
>
> You must be the retarded version of weasel.
>
> --
> http://michellemalkin.com/



Posted by on August 2, 2007, 1:11 am

> I love you to


Queer



Page 3 of 4       < 1 2 3 > last >>
Similar ThreadsPosted
R410a July 9, 2007, 7:19 pm
Re: R410a hoses?? August 30, 2006, 12:34 pm
Re: R410a hoses?? August 31, 2006, 9:05 am
R-22 vs. R410a (Puron) May 16, 2007, 1:03 pm
Re: Compressor noise R22 vs R410A September 28, 2006, 2:08 pm
Re: Compressor noise R22 vs R410A September 28, 2006, 11:02 pm
Compressor noise R22 vs R410A September 24, 2006, 2:43 am
Arcoair 13 Seer R410A 3 Ton July 28, 2008, 12:01 pm
r410a capacity in a typical model minisplit March 30, 2008, 8:42 pm
fan versus low freon August 11, 2006, 4:36 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap