A learning tech, a question about an experiment

Lloyd,

this group is similar to going to jail. You are fresh meat. You get picked
on. how you react to it will determine your fate. Respect is necessary to
the elder inmates or you will get your ass kicked. Fortunately, unlike jail,
you can just stay out of here and wimp out. OR you can be like dangerous
canadian heat or stormy and sound like an idiot and be treated like a circus
geek.
Personally for some reason I believe your story, but your disrespectful
comments to Bubba and Nooner will be remembered for a while.

Going to jail and trying to look tough most likely will get you fucked in
the ass more than one way. Remain cool and truthful. Your newbie ass has
challenged the opinions of the most highly respected techs here. "Danger
Will Robinson, Danger"

Your use of words will come in handy some day, but you have had a premature
ejaculation.

why do I care? I don't. Just sober at the moment.

Bob

>> On Tue, 17 Apr 2007 08:43:01 -0400, "Lloyd E. Sponenburgh"

>> You call Bubba a 'subuman plenum crawler' ?

>> Damn, son ! Your training is coming along quite well ! :-)

> Yeah. My training here on the group is going well, too. I really hope

> the demographics here don't match those two.

> Since Bugga and Non-Air couldn't even figure out the symptoms much less

> the problem, I asked the folks at Robinair to critique the experiment.

> They said the permeability of their hoses was such that 300-odd micron

> rise in 18 hours was well within the specs for the hoses, and that, yes,

> 500 microns is higher pressure than they would recommend, despite EPA's

> saying 600 was adequate. EPA could give a crap about the longevity of a

> system; they just want to keep CFCs out of the air.

> But, then, Bugga and Non-air probably use the "screwdriver in the Schrader

> recovery system", since they're so qualified.

> Seems like my county isn't the only one with a lack of qualified techs.

> LLoyd

Posted by danger on April 18, 2007, 5:39 pm

A jail full of pussies...HAHAHA

-Canadian Heat

--
--------------------------------- --- -- -
Posted with NewsLeecher v3.8 Final
Web @ http://www.newsleecher.com/?usenet
------------------- ----- ---- -- -

Posted by danger on April 17, 2007, 5:51 pm

"Does anybody besides this subhuman plenum crawler have a reasonable answer?
Obviously, Bubba can't figure it out.

LLoyd"

HAHAHAHAHA

Brilliant!

Great description, but there is no plenum his fat ass could fit in.

HAHA

I think if you can get a 50 micron vacuum you have nothing do worry about. I am
always waiting for that pump on a R22
system. 500 microns is fine with me, never had a problem. 410A systems go a
lot faster, I tripple evacuate them though.
The POE oil absorbs moisture so quickly.
I suspect your manifold guage is just introducing air to your vacuum, when you
reconnect the manifold guage to the system.
Your hoses shouldn't leak , maybe after a long long time. When I pressure test
indoor and outdoor coils with 200PSI I come
back in 3 days and either have a leak or the same pressure I left. I only lose
the pressure my guages steal when I
reconnect.

-Canadian Heat

--
--------------------------------- --- -- -
Posted with NewsLeecher v3.8 Final
Web @ http://www.newsleecher.com/?usenet
------------------- ----- ---- -- -

Posted by on April 17, 2007, 6:34 pm

"DANgER" <"danger"@heat.com wrote in message

> I think if you can get a 50 micron vacuum you have nothing do worry about.

I am always waiting for that pump on a R22

> system. 500 microns is fine with me, never had a problem. 410A systems

go a lot faster, I tripple evacuate them though.

> The POE oil absorbs moisture so quickly.

You really are clueless...

A new (since this is what he's asking about) R-22 or R-410 system pull down
the same, as they both have a new line set and evaporator.
(I know the *used* equipment you install includes the condenser when pulling
a vacuum, but you really shouldn't be giving out advice on *used* equipment
when the OP is asking about *new* equipment)

Also, if you think a triple evacuation gets the moisture out of an R-410
system (POE oil), you're also mistaken.

Every time you open your trap you show your incompetence!!

Posted by Bubba on April 17, 2007, 8:58 pm

On 17 Apr 2007 21:51:30 GMT, DANgER (danger<bubba@heat.com) wrote:

>"Does anybody besides this subhuman plenum crawler have a reasonable answer?

>Obviously, Bubba can't figure it out.

>LLoyd"

>HAHAHAHAHA

>Brilliant!

>Great description, but there is no plenum his fat ass could fit in.

>HAHA

>I think if you can get a 50 micron vacuum you have nothing do worry about. I

am always waiting for that pump on a R22

>system. 500 microns is fine with me, never had a problem. 410A systems go a

lot faster, I tripple evacuate them though.

>The POE oil absorbs moisture so quickly.

>I suspect your manifold guage is just introducing air to your vacuum, when you

reconnect the manifold guage to the system.

>Your hoses shouldn't leak , maybe after a long long time. When I pressure test

indoor and outdoor coils with 200PSI I come

>back in 3 days and either have a leak or the same pressure I left. I only lose

the pressure my guages steal when I

>reconnect.

>-Canadian Heat

How many people do you need to tell your stupid ass about evacuating
to an imaginary 50 micron level? Nearly impossible without lots of
special equipment and time.
Id like to hear you babble on about WHY a 410a system pumps down
faster. This outta be good. Hold on. I gotta get some of that popcorn
from Paul.
Hoses shouldnt leak?? Okay, thats a good one DANgER. I guess you are
using solid copper and flare nuts then on your gauges. Ever notice why
most hoses say "Charging hose" and not "Evacuation hose"?
I'll let you ponder that one for a bit.
You pressure test a coil for 3 days??? How the hell do you get
anything done. New gadget on the market, dunder head. Its called an
electronic leak detector. Several work very well. Spend some of that
so called fortune you have in your dirty laundry and buy one cheap
ass.
Oh and lastly you moron, triple evacuation is no longer necessary
unless you are still one of the clueless brain dead dick heads that
still uses a single stage vacuum pump. What? You dont know the
difference between a single and dual stage vacuum pump? Go figure.
You need a lesson in state of the art equipment bonehead.
Oh well, just keep licking those windows and playing with your nuts.
Bubba

Page 3 of 12 < 1 2 3 > last >>

Similar Threads	Posted
Tech question about variable speed compressors...	May 31, 2007, 12:57 pm
Tech question- Carrier 58STA Ignites and blows out	March 3, 2008, 8:01 pm
Re: Big Boy tech tip	July 12, 2008, 11:45 am
DDC Tech position	August 8, 2006, 12:50 pm
Ot: tech manuals	September 28, 2007, 1:29 am
AC not keeping up - tech says its ok - any ideas?	July 22, 2006, 6:41 pm
Servowarm Elite 50 - tech query	November 3, 2007, 11:22 am
Oldest Tech for the HVAC News	January 15, 2008, 3:11 pm
BTU question	July 15, 2006, 10:08 am
Re: SERIOUS QUESTION	April 10, 2008, 11:26 pm

XML Sitemap