|
Posted by on January 2, 2007, 8:48 pm
I thought this might be normal with the exception that very little (if
any) water was being discharged during the heat cycle. The owners
manual simply stated a small steady stream of water would be discharged
during the operation, but did not describe the flush I described.
Thanks for the information Stormin Mormon. Have a good day!
Stormin Mormon wrote:
> The ones I've installed, the water valve opens when the furnace
> is calling for heat, and the blower is running. So, what appears
> to be "flushing itself" is most likely excess water draining out
> of the evaporative pad.
>
> Sounds normal to me.
>
> --
>
> Christopher A. Young
> You can't shout down a troll.
> You have to starve them.
> .
|