Home Page link

B&Q Air Con

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 2 of 2       << first < 1 2 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
B&Q Air Con Golan 03-20-2007
---> Re: B&Q Air Con Stormin Mormon03-21-2007
  ---> Re: B&Q Air Con Jeffrey Lebowsk...03-21-2007
  `--> Re: B&Q Air Con New Directions ...03-21-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Stormin Mormon on March 21, 2007, 9:24 am
I've seen this type of device advertised in the US. What happens,
heat can't be destroyed, only moved. So, there is usually a hose
on the back that moves hot air out through a tube. You have to
open a window enough to put the vent tube out the window. This
means that outdoor air has to come in some how, to replace the
hot air which is being sent out.

From what I've seen, 12,000 BTU per hour is about the largest
unit that we have that will run on 110 volts, about 12 amperes
current draw. Do you have 220 volts in the UK?

At 220 volts, this unit would draw perhaps 7 or 8 amps. Will your
electrical system handle it?

Did you notice the price, of L400? That's about $800 US, which is
a bit pricey. Since we can get a window AC at Walmart for about
$100.

For a one bedroom flat, 16,000 BTU per hour may be a bit over
sized. In the US, window AC start about 5,000 BTU. A couple fans
would be desirable, to move the cold air around, so you don't
have a cold spot near the unit, and warm every where else.

--

Christopher A. Young
You can't shout down a troll.
You have to starve them.
.

: Did any one of you buy this unit? Or can give me information
about how
: good it is?
:
:
http://www.diy.com/diy/jsp/bq/nav/nav.jsp?action=detail&fh_secondid=9000407&fh_reftheme=promo_87041392%2cseeall%2c%2f%2fcatalog01%2fen_GB%2fcategories%3c%7b8530236%7d&fh_start_index=10&fh_location=%2f%2fcatalog01%2fen_GB%2fcategories%3c%7b8530236%7d%2fcategories%3c%7b8530241%7d&fh_eds=%c3%9f&fh_refview=lister&ts=1173114438302
:
: I live in London in a 1 bed basement flat.
: The bed-room window is very small and the living room window is
big
: but if I open the window it can get very noise.
: I did not spent a summer in the flat so I don't know what to
expect
: but it look's like there is no sufficient ventilation.
:
: I don't want to buy an air con that will not work.
:
: Can't install a permanent one
:
: Cheers.
:



PexSupply Save 50 468x60
Posted by Jeffrey Lebowski on March 21, 2007, 4:06 pm


> Do you have 220 volts in the UK?

Unbelievable that anyone could be so fucking incredibly dense.

--








Posted by on March 21, 2007, 4:21 pm
On Wed, 21 Mar 2007 12:06:17 -0800, "Jeffrey Lebowski"

>
>
>> Do you have 220 volts in the UK?
>
>Unbelievable that anyone could be so fucking incredibly dense.

        Well, they COULD have leaked out while they were being shipped
over there, ya know ....


--
Click here every day to feed an animal that needs you today !!!
http://www.theanimalrescuesite.com/

Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo now available online http://pmilligan.net/palm/

Posted by New Directions In Building Ser on March 21, 2007, 4:41 pm
> From what I've seen, 12,000 BTU per hour is about the largest unit that we
> have that will run on 110 volts, about 12 amperes current draw. Do you
> have 220 volts in the UK?

So at 110V you have 12A so that's 1320VA or about 1kW (electrical not kWR)
allowing for pf of 0.8

> At 220 volts, this unit would draw perhaps 7 or 8 amps. Will your
> electrical system handle it?

at 220 V 1320VA this would be 6Amps and yes the poms cam handle this fairly
easily.

> Did you notice the price, of L400? That's about $800 US, which is a bit
> pricey. Since we can get a window AC at Walmart for about $100.

> For a one bedroom flat, 16,000 BTU per hour may be a bit over sized. In
> the US, window AC start about 5,000 BTU. A couple fans would be desirable,
> to move the cold air around, so you don't have a cold spot near the unit,
> and warm every where else.
He didn't say how big a flat but this unit should go about 2.5kWR which
should be more than ample except when he has a dozen or more friends over to
party (like next time the poms win anything).

I'd suggest a better alternative if he's worried about noise is the "Oscar"
portable minisplit. You hang the small condenser out the window leaving a
gap just big enough for the electrical chord and frig lines then flash and
stop up the rest of the gap with something to keep the rain out but allow a
small plug so you can get a bit of OA when it's stuffy.

I was talking to my cousin in pommyland on skype the other night (*day
there) and half way through he said - "Sorry... have to go... the sun's come
out and I don't want to miss it!"


> : Did any one of you buy this unit? Or can give me information about how
> good it is?
> :
> http://www.diy.com/diy/jsp/bq/nav/nav.jsp
>
action=detail&fh_secondid=9000407&fh_reftheme=promo_87041392%2cseeall2c%2f%2fcatalog01%2fen_GB%2fcategories%3c%7b85302367d&fh_start_index=10&fh_location=%2f%2fcatalog01%2fen_GB2fcategories%3c%7b8530236%7d%2fcategories%3c%7b85302417d&fh_eds=%c3%9f&fh_refview=lister&ts=1173114438302
> :
> : I live in London in a 1 bed basement flat.
> : The bed-room window is very small and the living room window is big but
> if I open the window it can get very noise.
> : I did not spent a summer in the flat so I don't know what to expect but
> it look's like there is no sufficient ventilation.
> :
> : I don't want to buy an air con that will not work.
> :
> : Can't install a permanent one
> :
> : Cheers.



Page 2 of 2       << first < 1 2

Contact Us | Privacy Policy

XML SitemapXML Sitemap