Home Page link

Blinking Aprilaire 8366

Home| Search | About
Login Password
Register Now! Lost Password?

HVAC Discussions - Heating, ventilation and air conditioning. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Blinking Aprilaire 8366 Erik 10-11-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Erik on October 11, 2006, 9:30 am
Does anyone know what it means when all the LCD display characters
blink on and off in unison on an Aprilaire 8366
(http://www.aprilaire.com/index.php?znfAction=ProductDetails&category=23&sub=prog&item=8366)?
It's a programmable Heat/Cool Multistage thermostat. New batteries
don't change this behavior. Power is on to the furnace & condenser and
neither of them indicate an error.


Posted by Bubba on October 11, 2006, 2:45 pm

>Does anyone know what it means when all the LCD display characters
>blink on and off in unison on an Aprilaire 8366
>(http://www.aprilaire.com/index.php?znfAction=ProductDetails&category=23&sub=prog&item=8366)?
> It's a programmable Heat/Cool Multistage thermostat. New batteries
>don't change this behavior. Power is on to the furnace & condenser and
>neither of them indicate an error.

Oh Shit! Run! Immediately! Get out of the house! It is ready to blow!
Bubba

Posted by PrecisionMachinisT on October 11, 2006, 9:13 pm

>
> It is ready to blow!
>


He should hurry and unzip--today is his LUCKY DAY....

--

SVL




Posted by Joseph Meehan on October 11, 2006, 2:54 pm
Erik wrote:
> Does anyone know what it means when all the LCD display characters
> blink on and off in unison on an Aprilaire 8366
>
(http://www.aprilaire.com/index.php?znfAction=ProductDetails&category=23&sub=prog&item=8366)?
> It's a programmable Heat/Cool Multistage thermostat. New batteries
> don't change this behavior. Power is on to the furnace & condenser
> and neither of them indicate an error.

Well the instruction book only list for flashing data is when you are
changing settings. I suggest removing the battery for say an hour or two
and if that does not do it leave the battery out and try disconecting the
power supply to the furnace low voltage circuit.

--
Joseph Meehan

Dia duit



Similar ThreadsPosted
AprilAire 600 Humidifier Question January 1, 2007, 7:26 pm
SpaceGard/Aprilaire vs GeneralAire filter media January 18, 2007, 8:34 pm
Honeywell/Aprilaire humidity sensor failure March 4, 2007, 4:12 pm
Aprilaire 600 or Honeywell HE225/HE265 Humidifier? June 13, 2007, 6:54 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap