|
Posted by Stormin Mormon on June 19, 2008, 8:37 pm
Love your sense of humor. How many usenet posters know what a milking
machine is?
Ah, the perforated evaporators. No good.
Thanks for the field report, about the guy gaging his own system. I can
easily believe that. And the he goes to top it off, when the ambient temp is
about 20 degrees lower, and can't figure out why it's taking so much. And
why the evap keeps freezing.
--
Christopher A. Young
Learn more about Jesus
www.lds.org
.
new jersey wrote:
>>> Why any mechanic/tech. would replace evaporator coil because it is
>>> freezing up
>>> can some one explain that to me please please please?
>>> tony
>>
>> What happens when the coil leaks refrigerant??????
>> And you *think* you're a refrigerant genius.... Bawhahahaha
>>
>>
>
> If system did not last but few days it means evaporator was leaking
> when he or she made the change,
Not necessarily. Old equipment can and do pop a leak whenever they
damned well please. A couple of years back, I installed a complete new
system. 4 days later the owner called andd was pissed. I found a rubber
seal jammed into the suction valve allowing it to leak.. I got the
customer to admit that he had put a cheapy gauge set on it to see where
the pressure should be, so in future he might refill himself. He very
unhappily paid for the second sevice, labor and materials. I also have
pulled evaporators out of their trays to clean them and found you could
stick a finger through both the drain trays and the evaporator.
on other hand do we really know
> that evaporator is leaking or interconnect connection that was made.
> did tech check for acid in the system before change was made
> was it drier replaced which it could be clogged up causing coil to freeze
> up
> if evaporator open the leak on headers that could be repair with no
> to much of problem if Tech. is Tech. Did really Tech. find the leak or
> just
> said "coil is leaking it is not my problem" if coil is leaking where
> about is leaking in the fins can you get to it, Tech. should be able to
> point to
> customer exact spot and not just make arbitrary statement it is leaking
> it need to be replace. Perhaps that is type work you do but that is no
> way it should be done you should always make attempt to show customer
> what is all about.
Thats bullshit too.. A bunch of years back Sears put put some
evaporators in that had thousands of tiny leaks. You put dye in the
system and throw a black light on it after a couple of hours run and it
looked like millions of tiny fireflies.
>
> You always posting question and critics, Do you ever gave positive answer
> You making me wonder if you know difference between suction and discharge
> I don't think so! So Bawahahahehehoho to You
Keep making that noise and some farmers is going to stick a milking
machine on you.
>
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap