If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by blueman on August 15, 2006, 6:05 pm
Our 100+ yr old house currently has 3 separate forced hot air
gas-fired heating units.
We would like to add central air sharing the same ductwork and
blowers.
The "traditional" approach would be to add a separate
compressor/evaporator for each of the 3 heating units.
I have seen that some high end remodels are using a single chilled
water unit to supply coolant to multiply blower units and that this is
somehow "better".
Can anyone comment on the pros/cons and appropriateness of using such
a system residentially?
I am particularly interested in comparing initial cost (equipment &
installation), efficiency, noise-level, and reliability.
I will be hiring a reputable HVAC contractor for the installation.
Thanks.
|
|
Posted by =?iso-8859-15?Q?Tekkie=AE?= on August 15, 2006, 8:09 pm
blueman posted for all of us...
I don't top post - see either inline or at bottom.
> Our 100+ yr old house currently has 3 separate forced hot air
> gas-fired heating units.
>
> We would like to add central air sharing the same ductwork and
> blowers.
>
> The "traditional" approach would be to add a separate
> compressor/evaporator for each of the 3 heating units.
>
> I have seen that some high end remodels are using a single chilled
> water unit to supply coolant to multiply blower units and that this is
> somehow "better".
>
> Can anyone comment on the pros/cons and appropriateness of using such
> a system residentially?
>
> I am particularly interested in comparing initial cost (equipment &
> installation), efficiency, noise-level, and reliability.
>
> I will be hiring a reputable HVAC contractor for the installation.
>
> Thanks.
>
Hey Jeffy, you know you don't belong in alt.hvac so get your meds and get on
over to the other cross posted group so you can ask your oft answered questions
there.
--
Tekkie
|
|
Posted by Pat on August 15, 2006, 10:26 pm
One house and 3 furnaces = high energy bills. Water AC system will not
be cheap.
I'm not sure if this would will work, but you should look into a
ground-linked heat pump system. I think some are water systems plus
you might be able to use it to heat your house.
blueman wrote:
> Our 100+ yr old house currently has 3 separate forced hot air
> gas-fired heating units.
> We would like to add central air sharing the same ductwork and
> blowers.
> The "traditional" approach would be to add a separate
> compressor/evaporator for each of the 3 heating units.
> I have seen that some high end remodels are using a single chilled
> water unit to supply coolant to multiply blower units and that this is
> somehow "better".
> Can anyone comment on the pros/cons and appropriateness of using such
> a system residentially?
> I am particularly interested in comparing initial cost (equipment &
> installation), efficiency, noise-level, and reliability.
> I will be hiring a reputable HVAC contractor for the installation.
>
> Thanks.
|
|
Posted by Richard J Kinch on August 16, 2006, 12:52 am
blueman writes:
> I have seen that some high end remodels are using a single chilled
> water unit to supply coolant to multiply blower units and that this is
> somehow "better".
Where have you seen that?
Are you sure the water is not cooling separate compressors/evaporators at
each air handler? Rather difficult to cool efficiently without a phase
change.
|
|
Posted by Pat on August 16, 2006, 1:26 am
Not sure, but I think the OP is looking for a system like a "motel
system" that circulates chilled water to all of the systems and a fan
blows when a unit calls for cooling. He is looking for a system with a
heat exchanger rather than a air-based system like a regular AC.
Richard J Kinch wrote:
> blueman writes:
> > I have seen that some high end remodels are using a single chilled
> > water unit to supply coolant to multiply blower units and that this is
> > somehow "better".
> Where have you seen that?
> Are you sure the water is not cooling separate compressors/evaporators at
> each air handler? Rather difficult to cool efficiently without a phase
> change.
|
Page 1 of 2 1 2 > last >>
| Similar Threads | Posted | | Baseboard Hot/chilled water vs. forced air: efficiency | October 22, 2009, 1:03 am |
| Re: Dehydrating Heavily Water Laden Systems | January 13, 2009, 6:16 pm |
| Re: Dehydrating Heavily Water Laden Systems | January 16, 2009, 9:21 am |
| Re: Dehydrating Heavily Water Laden Systems | January 16, 2009, 9:26 pm |
| Replacing oil fired burner with on-demand LP water heater in forced air system | October 20, 2007, 8:41 pm |
| "water test" for residential heat exchangers - thoughts? | September 14, 2006, 12:53 am |
| A/C Systems | July 19, 2007, 8:59 am |
| Intertherm gas forced hot air furnace. | December 24, 2007, 12:14 pm |
| Forced air heating problem | January 31, 2008, 7:23 pm |
| Unico systems - anyone work with these? | July 8, 2007, 11:09 am |
|
|
> gas-fired heating units.
>
> We would like to add central air sharing the same ductwork and
> blowers.
>
> The "traditional" approach would be to add a separate
> compressor/evaporator for each of the 3 heating units.
>
> I have seen that some high end remodels are using a single chilled
> water unit to supply coolant to multiply blower units and that this is
> somehow "better".
>
> Can anyone comment on the pros/cons and appropriateness of using such
> a system residentially?
>
> I am particularly interested in comparing initial cost (equipment &
> installation), efficiency, noise-level, and reliability.
>
> I will be hiring a reputable HVAC contractor for the installation.
>
> Thanks.
>