Home Page link

Clean oil residue from inside refrigerant hoses

Home| Search | About
Login Password
Register Now! Lost Password?

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 2 of 4       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Clean oil residue from inside refrigerant hoses pv=nrt 01-13-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by DIMwit on January 14, 2007, 5:41 pm
Dido,

I am sure you meant to say Rx-11; Dupont added an x in the name, making it
ozone friendly. If you buy the right stuff and believe (yes, believing is
necessary), then it is OK to use the Rx-11.

You did, right? And don't leave any spilled anti-freeze in your driveway for
the critters to drink. Ooh.:-((( A lady in Florida killed two guys with
anti freeze cocktails.


>
>>
>>>

>>>From Dido
>>>
>> Oh My Gawd!
>> R-11, R-12, R-22, etc.
>> You didnt really just say that, did you Dido?
>> Bubba
>
> Yes I said that and don't gave me your innocence you and
> many other HVAC guys you can see them on top of roofs
> blowing refrigerant and then charging customer for it.
>
> And Mr. Loblaw: No I would not be draining motor oil
> in to catch basin but I am sure you are talking out of
> experience I think that sound s about right isn't
> Dido
>
>
>
>>>> Is there anything else I can do to clean the inside of my hoses???
>>>> (IPA or mineral spirit flush??)
>>>>
>>>> I won't take a chance using these hoses for R-410A systems but will a
>>>> very minor amount of vacuum pump oil be compatable with mineral oil in
>>>> R22 systems?
>>>
>
>



Posted by Bob_Loblaw on January 14, 2007, 8:40 pm






>you and
> many other HVAC guys you can see them on top of roofs
> blowing refrigerant and then charging customer for it.


So, while you're sitting outside in your truck, you can see hvac guys on
top of roofs, blowing the charge????... Then you see them go inside and you
HEAR THEM charge the customer for lost refrigerant???
What you're REALLY telling us is that YOU do this, and you suspect others
of doing it as well, so we shouldn't judge you too harshly, because you're
not the only one doing it.
Don't try to drag down the rest of us by putting us in the same category as
yourself!
YOU are a special breed of stupid!



--
Respectfully, Bob

Posted by AKS on January 15, 2007, 9:15 am
You have right to say what ever you wish
however my friend you can snow job some people
once a while but not all the time
I do not work on roofs, I do not carry ladder's
but I do read news from time to time
have nice day looser hahaheeeee
Dido say that



>
>
>>you and
>> many other HVAC guys you can see them on top of roofs
>> blowing refrigerant and then charging customer for it.
>
> So, while you're sitting outside in your truck, you can see hvac guys on
> top of roofs, blowing the charge????... Then you see them go inside and
> you
> HEAR THEM charge the customer for lost refrigerant???
> What you're REALLY telling us is that YOU do this, and you suspect others
> of doing it as well, so we shouldn't judge you too harshly, because you're
> not the only one doing it.
> Don't try to drag down the rest of us by putting us in the same category
> as
> yourself!
> YOU are a special breed of stupid!
> --
> Respectfully, Bob



Posted by Bubba on January 15, 2007, 5:00 pm

>
>>
>>>
>>>> My vacuum pump, (soon to be formal vacuum pump), abruptly shut off
>>>> while I was pulling a strong vacuum. The vacuum it created self
>>>> sucked some vacuum pump oil into the refrigerant hoses that were
>>>> connected to it.
>>>>
>>>> I blew out the hoses with compressed air and then had the vacuum pump
>>>> suck on them for awhile to pull out any residual oil.
>>>
>>>Number one you vacuum pump can not vacuum out vacuum oil
>>>the only solution is purge it with liquid refrigerant preferable R-11
>>>you don't have it R-134, 12, 114, 22 Etc.
>>>if you got any oil into refrigeration system you got problem!
>>>From Dido
>>>
>> Oh My Gawd!
>> R-11, R-12, R-22, etc.
>> You didnt really just say that, did you Dido?
>> Bubba
>
>Yes I said that and don't gave me your innocence you and
>many other HVAC guys you can see them on top of roofs
>blowing refrigerant and then charging customer for it.

You're wrong Dido. For one, I dont have any R-11 or R-12. That was a
few years ago. Now I spend the $200 for that Calgon Rx-11 kit and use
it. The price sucks but what the hell,...........the customer pays for
everything.
I also dont blow refrigerant. I couldnt afford the fine. It would ruin
me. Unfortunately, I have to play the game and use recovery machines.
Make no mistake though, If I catch you or someone blowing refrigerant,
I would turn you in. I have a camera phone on me and a digital camera
in my truck that takes movies with a 2GB card in it. If I have to play
by those stupid rules (and I do think they are stupid) then everyone
else will.
Bubba
>
>And Mr. Loblaw: No I would not be draining motor oil
>in to catch basin but I am sure you are talking out of
>experience I think that sound s about right isn't
>Dido
>
>
>
>>>> Is there anything else I can do to clean the inside of my hoses???
>>>> (IPA or mineral spirit flush??)
>>>>
>>>> I won't take a chance using these hoses for R-410A systems but will a
>>>> very minor amount of vacuum pump oil be compatable with mineral oil in
>>>> R22 systems?
>>>
>

Posted by Bob_Loblaw on January 14, 2007, 2:22 pm



> Number one you vacuum pump can not vacuum out vacuum oil
> the only solution is purge it with liquid refrigerant preferable R-11
> you don't have it R-134, 12, 114, 22 Etc.

Yes, and after that, why not park your truck over top of any catchbasin and
drain your old engine oil!
Then, if you have any old tires, burn them in your backyard.
Dido was going to say that!

--
Respectfully, Bob

Page 2 of 4       < 1 2 3 > last >>
Similar ThreadsPosted
Re: R410a hoses?? August 30, 2006, 12:34 pm
Re: R410a hoses?? August 31, 2006, 9:05 am
LifeBreath Clean Air Furnace September 14, 2007, 1:00 pm
Re: Bi-Flow Clean-up Filter Driers in Inverter Splits February 29, 2008, 7:55 am
Re: Bi-Flow Clean-up Filter Driers in Inverter Splits March 1, 2008, 3:51 pm
Re: Bi-Flow Clean-up Filter Driers in Inverter Splits March 1, 2008, 6:12 pm
Should I reinstall both the inside and outside units? July 12, 2007, 7:03 am
Inside blower not coming on May 28, 2007, 7:29 pm
bulges and "hot spots" inside 20 year old furnace...do I really need new one? October 4, 2007, 6:38 pm
Found crack in cylindrical part inside A/C condenser unit June 27, 2008, 8:58 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap