|
Posted by on August 24, 2007, 10:20 pm
> wrote:
> > What brand is the air handler?
> > Oh, just like last spring... It's not the variable speed recommended by
> > Waterfurnace?
> > It's a brand X, constant speed, recommended by your installer, cuz
that's
> > the way he's always done it?
> >
> > The 14" rnd is code by who & for what? A 6 ton 2400 cfm unit or ???
> > Most inspectors couldn't find there way around a ductulator anyhow, why
are
> > you believing him?
> > Code calls for gauge metal & installation, insulation, sealing etc...
not
> > sizing,
> > or is the air handler a 3HP high velocity unit?
> > Is he a buddy of the installer? Is he the Waterfurnace dealer or is the
> > installer?
> >
> > Your installer frankensteined a frankenfurnace & your blaming the only
piece
> > of equipment that has a label...
> > If you haven't finished the first bowl, as I recommended before, Eat
Another
> > Bowl of Fuck!!!
> >
> > Or as I stated Aug 1st:
> > "Yo...Douche Bag,
> > We talked about your 14"round zoned geosystem months ago.
> > Until you fix the duct your fuct.
> >
> > Don't blame the equipment until the installation is fixed.
> > I'm calling your utility provider to up your rate until you grow a pair
&
> > fix the real issues.
> > So, why don't you just eat a bowl of fuck..."
> >
> > geothermaljones
> > st.paul,mn.
> >
> >
> >
> >
> >
> > > I have a EZ072S11ABB5A 3 to 6 ton spilt unit in my new home, s/n #
> > > WA1012. We have had problems from the start or from last year of 06.
> > > The State Inspector had to make the installer bring the duct work up
> > > to code ( A Waterfurance dealer) . We know in Aug. 06 the compressor
> > > wasn't going in to six ton. It was replaced in Sept. 06.
> > > Waterfurance sent a rep. which his report in word, didn't have any
> > > data. He found a major leak in my duct work in my wall, which has
> > > been fixed. After all the repairs my kw usage is the same as 06. My
> > > kw usage is the same summer and winter over 4000kw per month. The
> > > Waterfurance runs 22 hrs. per day, everyday. My house is 4200 sq.ft
> > > with 3 zones. I have added whole home window film, to drop the load.
> > > I have Nu-Wool insulation. I have had another waterfurnace dealer
> > > check my home. It's been unreal. This job was way over our budget
> > > from our other quotes for air to air units. It's acting as it did when
> > > the compressor was out, run and run and not keep up.
> > > It has 14'' round supply. I've have paid threw the nose on other
> > > dealers to check my system. Everyone comes up with a different
> > > solution. It seem like a asshole, everyone has one. At the end of
> > > the day, I wish, we had went with Trane air to air to save money.
> > > hack,hack,hack
> > > Regards, RT- Hide quoted text -
> >
> > - Show quoted text -
>
> Waterfurance said the duct was good at 14'' . The frankensteined air
> handler was changed to a 1hp Variable speed motor. which was supplied
> from Waterfurance, This was also o'kayed from the factory rep.
> Regards, Douche Bag
EVERYBODY here has posted that your 14" isn't going to cut it.
If the tech reps at Waterfurnace believe that shit, they need to be replaced
by someone that's competent!!!!!
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap