Home Page link

For you experts

Home| Search | About
Login Password
Register Now! Lost Password?

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 2 of 5       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
For you experts Tony 06-08-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Bill on June 10, 2007, 4:06 pm

> Bill I don't know if you pulling my leg are serious
> but live load means: if you have electrical heater
> in side your refrigerator weighing let say 500# without being plug in
> it is dead load once is plug in and turn on example 17 kw.
> then is live load plus dead load both must be consider into load.
> however calculated separately then combine to gave you total load.
> don't forget that 500# of potatoes you will cool down and heat load
> will go down with temperature but live load 17 kw of heat
> it remained 17 kw. in some cases may even increase because
> of resistance change depend on direct or indirect exposure
> to the conditions in side refrigerator/box
> Tony

The garble you normally post always requires clarification.
So according to the above you left out the weight of your 17,000 watt
live load.
How about posting enough info to determine the particulars.
You want to make people guess what you have. That shows your ignorance.
Run time, doors, usage, people, etc.
I guess 5.78 ton. So what you came up with is grossly oversized based on
your specs.

It's not like there aren't sheets or programs to input the info. Even a
quick load chart and some figuring.
You've done refrigeration how long?
You're starting to smell like weasel.

--
http://hotair.com/

Posted by on June 10, 2007, 4:20 pm

>
>> Bill I don't know if you pulling my leg are serious
>> but live load means: if you have electrical heater
>> in side your refrigerator weighing let say 500#

        That is one HEAVY MOTHERFUCKING HEATER to be keeping your
refrigerator !!!! 500 pounds ???? The heater weighs more than the
fucking refrigerator it's in, by a factor of two ???? Damn !!!!!

>> without being plug in
>> it is dead load once is plug in and turn on example 17 kw.

        17 KW FOR A FUCKING REFRIGERATOR HEATER ??????

        What are you trying to do, HEAT THE WHOLE FUCKING NEIGHBORHOOD
???? 58,000 BTUH ????

        Either that, or YOU'RE A FUCKING MORON.

>The garble you normally post always requires clarification.

        Dildo's posts require a bit more than that - they require a
complete suspension of the natural rules of the universe. They also
require the construction and marketing of things that have never been
contructed or marketed.


>So according to the above you left out the weight of your 17,000 watt
>live load.
>How about posting enough info to determine the particulars.
>You want to make people guess what you have. That shows your ignorance.
>Run time, doors, usage, people, etc.
>I guess 5.78 ton. So what you came up with is grossly oversized based on
>your specs.
>
>It's not like there aren't sheets or programs to input the info. Even a
>quick load chart and some figuring.
>You've done refrigeration how long?
>You're starting to smell like weasel.

        Stop insulting weasels.


--
Click here every day to feed an animal that needs you today !!!
http://www.theanimalrescuesite.com/

Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo now available online http://pmilligan.net/palm/

Posted by Tony on June 11, 2007, 9:51 am
Bill dead weight load (mass) which could be anything from potato to gold
it does not matters what it is, you can be few thousand Btus. one way other
it may take little more time to get to temperature but live load will not!

And Paul this is not Refrigerator I have use that as example,
this is Environmental test chamber it is sophisticated BALLY box
it is made modified for temp. range of -100 deg. F to +185 deg. F
with RH range 5% to 95% with in 40 deg. to 180 deg. F
Temp. +&- control 1deg.F, and Relative Humidity +&- 2% control
I have posted many times I do not work on same that you guys do.
Tony
www.cas-environ.com




>
>> Bill I don't know if you pulling my leg are serious
>> but live load means: if you have electrical heater
>> in side your refrigerator weighing let say 500# without being plug in
>> it is dead load once is plug in and turn on example 17 kw.
>> then is live load plus dead load both must be consider into load.
>> however calculated separately then combine to gave you total load.
>> don't forget that 500# of potatoes you will cool down and heat load
>> will go down with temperature but live load 17 kw of heat
>> it remained 17 kw. in some cases may even increase because
>> of resistance change depend on direct or indirect exposure
>> to the conditions in side refrigerator/box
>> Tony
>
> The garble you normally post always requires clarification.
> So according to the above you left out the weight of your 17,000 watt
> live load.
> How about posting enough info to determine the particulars.
> You want to make people guess what you have. That shows your ignorance.
> Run time, doors, usage, people, etc.
> I guess 5.78 ton. So what you came up with is grossly oversized based on
> your specs.
>
> It's not like there aren't sheets or programs to input the info. Even a
> quick load chart and some figuring.
> You've done refrigeration how long?
> You're starting to smell like weasel.
>
> --
> http://hotair.com/



Posted by Bill on June 11, 2007, 12:27 pm
wrote:

> Bill dead weight load (mass) which could be anything from potato to gold
> it does not matters what it is, you can be few thousand Btus. one way other
> it may take little more time to get to temperature but live load will not!

Lobsters, turkeys, fruit. What are you freezing? Electric heaters?
Buy a clue.

> And Paul this is not Refrigerator I have use that as example,
> this is Environmental test chamber it is sophisticated BALLY box
> it is made modified for temp. range of -100 deg. F to +185 deg. F
> with RH range 5% to 95% with in 40 deg. to 180 deg. F
> Temp. +&- control 1deg.F, and Relative Humidity +&- 2% control
> I have posted many times I do not work on same that you guys do.
> Tony

You think you're the only one that works on those?
Thermotron for example. So basically you posted some crap to puff
yourself up and actually exposed yourself for a dufus.

--
http://michellemalkin.com/

Posted by danger on June 11, 2007, 1:42 pm
anyone else think bill is an ass muncher?

bill, your a dumb old man trained in the old ways....step aside and let real
pros take over.
guys like you give the trade a bad name.

like a dumb old dog you are....

HAHA

-Canadian Cool


--
--------------------------------- --- -- -
Posted with NewsLeecher v3.8 Final
Web @ http://www.newsleecher.com/?usenet
------------------- ----- ---- -- -


Page 2 of 5       < 1 2 3 > last >>
Similar ThreadsPosted
Seeking Aircon experts for refinement of aircon efficiency improvement solutions July 26, 2006, 5:27 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap