If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by on June 30, 2007, 12:13 am
The first time I met him in person was at ASHRAE, I forget where -
Atlanta, maybe ? We had already been working on PMTHERM for a quite a
while together, but had never met.
I saw him at Sporlan's booth, so I turned my name badge around, picked
up a demo TXV from teh table, and waited until he was done with the
guy he was talking to.
I held it up in front of him , and sad, with a DEAD serious face '
" Hi. I have a question about these things. This part here (
pointing to the transmit tube form the sensing bulb ) is always too
long, and it flops around, so recently I started cutting out the extra
slack and sweating the ends back together with a coupling.
A lot of them don't seem to work right. Is there a
manufacturing problem ?"
Talk about 'Catching poor old Andy off guard' :-) ..... and
speechless, for the first and only time since I've know him :-)
--
Click here every day to feed an animal that needs you today !!!
http://www.theanimalrescuesite.com/
Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo now available online http://pmilligan.net/palm/
|
|
Posted by Bill on June 30, 2007, 12:25 am
.p.jm@see_my_sig_for_address.com wrote:
> A lot of them don't seem to work right. Is there a
> manufacturing problem ?"
>
> Talk about 'Catching poor old Andy off guard' :-) ..... and
> speechless, for the first and only time since I've know him :-)
That's good. lol
--
http://michellemalkin.com/
|
|
Posted by on June 30, 2007, 12:33 am
> The first time I met him in person was at ASHRAE, I forget where -
> Atlanta, maybe ? We had already been working on PMTHERM for a quite a
> while together, but had never met.
> I saw him at Sporlan's booth, so I turned my name badge around, picked
> up a demo TXV from teh table, and waited until he was done with the
> guy he was talking to.
> I held it up in front of him , and sad, with a DEAD serious face '
> " Hi. I have a question about these things. This part here (
> pointing to the transmit tube form the sensing bulb ) is always too
> long, and it flops around, so recently I started cutting out the extra
> slack and sweating the ends back together with a coupling.
I usually swage one end.
> A lot of them don't seem to work right. Is there a
> manufacturing problem ?"
> Talk about 'Catching poor old Andy off guard' :-) ..... and
> speechless, for the first and only time since I've know him :-)
Good one. :-)
|
|
Posted by on June 30, 2007, 12:41 am
>> The first time I met him in person was at ASHRAE, I forget where -
>> Atlanta, maybe ? We had already been working on PMTHERM for a quite a
>> while together, but had never met.
>> I saw him at Sporlan's booth, so I turned my name badge around, picked
>> up a demo TXV from teh table, and waited until he was done with the
>> guy he was talking to.
>> I held it up in front of him , and sad, with a DEAD serious face '
>> " Hi. I have a question about these things. This part here (
>> pointing to the transmit tube form the sensing bulb ) is always too
>> long, and it flops around, so recently I started cutting out the extra
>> slack and sweating the ends back together with a coupling.
>I usually swage one end.
I was young and foolish :-)
>> A lot of them don't seem to work right. Is there a
>> manufacturing problem ?"
>> Talk about 'Catching poor old Andy off guard' :-) ..... and
>> speechless, for the first and only time since I've know him :-)
>Good one. :-)
--
Click here every day to feed an animal that needs you today !!!
http://www.theanimalrescuesite.com/
Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo now available online http://pmilligan.net/palm/
|
|
Posted by r.bartlett on June 30, 2007, 6:23 am
> I was young and foolish :-)
And now you can only manage half of those...
Cheers
Richard
|
| Similar Threads | Posted | | Too funny | November 18, 2006, 8:42 pm |
| Too funny ! | July 22, 2008, 11:54 pm |
| An HMS Warranty story | August 25, 2007, 9:05 am |
| A furnace story (that wasnt to be) | December 9, 2007, 12:04 pm |
| Story time... Roofer says... "I can cap your chimney" | July 9, 2008, 11:55 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> manufacturing problem ?"
>
> Talk about 'Catching poor old Andy off guard' :-) ..... and
> speechless, for the first and only time since I've know him :-)