|
Posted by Zyp on February 2, 2008, 3:55 pm
Bob D. wrote:
> I'm trying to find air filters for a Carrier model 58DHB055-CC.
> Evidently there are supposed to be two filters that sit in the
> return-air plenum above the blower in a V configuration. Is there a
> part number for this filter? Perhaps a larger filter that can be cut
> down to size? I haven't been able to find any information about this
> furnace on the internet. I don't even know how old this furnace is.
> Presently, the furnace is running without any filters at all. (Is
> this a terribly bad thing to do?).
> --
> Bob D.
This furnace was produced from 1984 - 1998 and this filter is a "field
supplied" item. If you do not have a filter, your indoor blower and motor
will become clogged with dust bunnies. These intern will plug up air holes
in the motor, and clog the blower wheel reducing performance. If you have
air conditioning, it'll even be worse. The indoor cooling coil will [which
already would be] become clogged as well. Check to see if the return grille
is hinged, and can house a filter.
--
Zyp
|