Home Page link

Gas boiler - continuously cycling

HVAC Discussions - Heating, ventilation and air conditioning. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Gas boiler - continuously cycling tom_sawyer70@yahoo.com 01-13-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by tom_sawyer70@yahoo.com on January 13, 2008, 7:48 pm
Friend has a gas boiler with radiant heat and noticed today that it
starts firing, shuts off, repeats, for about a minute or two before it
quits.

The water heater has a flame and has maintained temperature (in the
same room) and the temperature in the house has not dropped below the
prescribed level from the programmable thermostat (there is water flow
through the pipes that provide radiant heat, but there is a whiff of
gas that can be smelled during the firing on/off.

I've read where this can be caused by low water flow through the
system, or just a dirty burner.

Several service calls have been placed to local service businesses,
but have not been responded to yet.

Is there anything to be reset or that can be manually cleaned?





Posted by tom_sawyer70@yahoo.com on January 13, 2008, 7:59 pm
wrote:
> Friend has a gas boiler with radiant heat and noticed today that it
> starts firing, shuts off, repeats, for about a minute or two before it
> quits.
>
> The water heater has a flame and has maintained temperature (in the
> same room) and the temperature in the house has not dropped below the
> prescribed level from the programmable thermostat (there is water flow
> through the pipes that provide radiant heat, but there is a whiff of
> gas that can be smelled during the firing on/off.
>
> I've read where this can be caused by low water flow through the
> system, or just a dirty burner.
>
> Several service calls have been placed to local service businesses,
> but have not been responded to yet.
>
> Is there anything to be reset or that can be manually cleaned?


Just to be clear ... the boiler fires, quits, fires, etc. for a minute
or two before it quits, but then does so again on the next (pardon my
nomenclature) "call for heat" (?) from the thermostat ... there is a
correlation between the "click" of the stat and the boiler firing.

However, the temp is near the therm temp, so I don't know if this is
"normal" or not, since the water would only need to be minimally
heated to remain at temp, but this is the first time that the smell is
present.


Similar ThreadsPosted
Any boiler OWNER save money after converting to a high efficiency boiler? August 6, 2006, 11:25 am
short cycling January 14, 2007, 8:27 pm
When Am I Short Cycling? June 11, 2007, 8:27 pm
pls help: gas furnace short-cycling ... January 23, 2008, 4:23 pm
Cycling too fast?? Furnace or thermostat October 20, 2006, 11:07 am
Problem with AC comressor fast cycling February 21, 2007, 9:03 pm
Floor Furnace Main Valve Cycling Problem January 26, 2007, 5:16 pm
Running fan continuously? May 30, 2008, 5:23 pm
Airhandler on continuously / compress not coming on July 20, 2006, 11:36 pm
System 2000 Inducer Runs continuously November 4, 2006, 5:41 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap