If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by on November 5, 2008, 10:20 pm
The fiberglass insulation on my furnace's plenum has slipped. The
insulation
has to be re-glued. Home Depot has a number of 3M spray adhesives,
but
no one seems to know which would be safe on a small (50,000BTU)
residential furnace plenum. Can anyone tell me which spray adhesives
would
be safe?
Thank you,
Jake
|
|
Posted by on November 5, 2008, 10:23 pm
On Wed, 5 Nov 2008 19:20:21 -0800 (PST), jake.pinneberg@gmail.com
wrote:
>The fiberglass insulation on my furnace's plenum has slipped. The
>insulation
>has to be re-glued. Home Depot has a number of 3M spray adhesives,
>but
>no one seems to know which would be safe on a small (50,000BTU)
>residential furnace plenum. Can anyone tell me which spray adhesives
>would
>be safe?
>Thank you,
>Jake
Any of them. It only gets to ~ 140 F.
--
Click here every day to feed an animal that needs you today !!!
www.theanimalrescuesite.com/
Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo online at www.pmilligan.net/palm/
Free 'People finder' program now at www.pmilligan.net/finder.htm
|
|
Posted by on November 5, 2008, 11:58 pm
On Nov 5, 7:20=A0pm, jake.pinneb...@gmail.com wrote:
> The fiberglass insulation on my furnace's plenum has slipped. =A0The
> insulation
> has to be re-glued. =A0Home Depot has a number of 3M spray adhesives,
> but
> no one seems to know which would be safe on a small (50,000BTU)
> residential furnace plenum. =A0Can anyone tell me which spray adhesives
> would
> be safe?
> Thank you,
> Jake
Not a spray adhesive, but Sodium Silicate ( water glass ) is used as
an adhesive for thing like cardboard boxes. Should work for gluing
fiberglass. It will not burn. It is also used for stiffening high
temp insulation such as kaowool used for kilns and forges.
=20
Dan
|
| Similar Threads | Posted | | home depot | February 13, 2007, 1:55 pm |
| Home Depot Slapped | May 4, 2007, 8:56 am |
| Spray paint on vent ducts | July 14, 2006, 11:03 am |
| DIY INstalling furnace ductiwork in new home | September 22, 2006, 6:46 am |
| choosing best furnace for home remodel | January 11, 2008, 10:55 pm |
| First time home owner: Furnace questions. Please help!! | July 30, 2006, 3:17 am |
| Spray rain water or collected condensate water on compressor to raise efficiency? | September 28, 2007, 11:14 pm |
| Home furnace: 1 of 4 gas jets seldom lights. Bad valve? | December 10, 2007, 12:27 pm |
| high/low side insulation | July 9, 2007, 4:02 pm |
| Poor insulation technique | January 12, 2008, 11:49 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>insulation
>has to be re-glued. Home Depot has a number of 3M spray adhesives,
>but
>no one seems to know which would be safe on a small (50,000BTU)
>residential furnace plenum. Can anyone tell me which spray adhesives
>would
>be safe?
>Thank you,
>Jake