Home Page link

How to install an overhead shop furnace in my garage

Home| Search | About
Login Password
Register Now! Lost Password?

HVAC Discussions - Heating, ventilation and air conditioning. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
How to install an overhead shop furnace in my garage balloonpilot 11-16-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by balloonpilot on November 16, 2006, 1:51 am
Hi there:

I just purchased a somewhat used Reznor overhead furnace for my garage.
I would like to find out 1) what's the best way to determine if the
thing is entirely OK to operate and 2) the best way to hang it. I have
the wiring and the chimney already installed but I'm not entirely
stupid.. I will get a pro to hook up the gas :)

I'd just like it to be up know it's running running before I go
further.

Thanks in advance.


Posted by RSCamaro on November 16, 2006, 6:10 am
On 15 Nov 2006 22:51:30 -0800, "balloonpilot"

>Hi there:
>
>I just purchased a somewhat used Reznor overhead furnace for my garage.
> I would like to find out 1) what's the best way to determine if the
>thing is entirely OK to operate and 2) the best way to hang it. I have
>the wiring and the chimney already installed but I'm not entirely
>stupid.. I will get a pro to hook up the gas :)
>
>I'd just like it to be up know it's running running before I go
>further.
>
>Thanks in advance.

Go and do a search online for the installation and maintenance
manuals, they should be in PDF files somewhere. Follow the directions
after that. Most Reznors are fairly simple pieces and are easy to set
up properly, but you need the install manual regardless.

...Ron
--
68'RS Camaro
88'Formula
00'GT Mustang

Posted by Bubba on November 16, 2006, 7:34 am
On 15 Nov 2006 22:51:30 -0800, "balloonpilot"

>Hi there:
>
>I just purchased a somewhat used Reznor overhead furnace for my garage.
> I would like to find out 1) what's the best way to determine if the
>thing is entirely OK to operate and 2) the best way to hang it. I have
>the wiring and the chimney already installed but I'm not entirely
>stupid.. I will get a pro to hook up the gas :)
>
>I'd just like it to be up know it's running running before I go
>further.
>
>Thanks in advance.

1) Toss it in the scrap heap and buy a new one
2) Hang it according to the installation instructions included with
the new unit.
Why would you do everything and then "hire a pro to hook up the gas?"
Bubba

Posted by Noon-Air on November 16, 2006, 9:19 am
You have an overhead shop in your garage??

> Hi there:
>
> I just purchased a somewhat used Reznor overhead furnace for my garage.
> I would like to find out 1) what's the best way to determine if the
> thing is entirely OK to operate and 2) the best way to hang it. I have
> the wiring and the chimney already installed but I'm not entirely
> stupid.. I will get a pro to hook up the gas :)
>
> I'd just like it to be up know it's running running before I go
> further.
>
> Thanks in advance.
>



Posted by =?iso-8859-15?Q?Tekkie=AE?= on November 17, 2006, 6:46 pm
balloonpilot posted for all of us...

> Hi there:
>
> I just purchased a somewhat used Reznor overhead furnace for my garage.
Somewhat used? Huh
> I would like to find out 1) what's the best way to determine if the
> thing is entirely OK to operate and 2) the best way to hang it. I have
> the wiring and the chimney already installed but I'm not entirely
> stupid.. I will get a pro to hook up the gas :)
Oh, just mostly stupid
> I'd just like it to be up know it's running running before I go
> further.
Run Forrest, RUNNNNN
> Thanks in advance.
>
Yur welcum I'm shure
--
Tekkie Don't bother to thank me, I do this as a public service.

Similar ThreadsPosted
DIY Install of new oil burning furnace? November 5, 2007, 9:14 am
Furnace Install questions October 17, 2007, 11:42 am
Home Shop 18 - Godrej Split AC 2 Ton July 28, 2008, 8:03 am
Re: The dangers of wearing shorts in a machine shop July 3, 2006, 6:11 am
Store / Shop / Warehouse space available in Edmonto November 19, 2006, 11:25 am
ERV Vented to Garage? January 16, 2007, 11:41 pm
Bolt Together Garage May 4, 2008, 7:49 am
The Hot Dawg Garage Gas Heater October 26, 2007, 1:11 am
Custom Wood Garage Doors April 19, 2008, 7:50 am
Metal Duct in Garage against code? May 29, 2008, 5:39 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap