Home Page link

Igniter Life - Page 3

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 3 of 5       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Igniter Life MLD 01-21-2009
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Alexander on January 23, 2009, 3:50 am
Bipolar Bear wrote:
>
>> The laws here prevent me from installing any used fosil fuel appliance.
>
> Sounds a bit far fetched would appreciate a reference to the relevant code.
>

It is pretty common through out the US of A, Mr Homsexual-Bear.
do your own homework and be off with you. Liability Insurance won't
cover it either. You are taking on product liability as once that
equipment is removed from its original install, the manufacturer no
longer has that liability. But of course you being a know it all, all
ready knew that. What a tooty-frooty!
> --
>
>
>
>

Posted by The King on January 22, 2009, 4:53 pm
On Wed, 21 Jan 2009 23:08:35 -0500, "Stormin Mormon"

>When I used to do installs, once in a while, the boss would
>ask us to take a furnace out neat and tidy. He knows some
>landlords who can use furnace in good condition. I'm very
>pleased you put the "trouble unit" to good use.


I did my best to convince the HO that she didn't need a new furnace
but she was insistent about it so she got what she wanted.

Posted by Stormin Mormon on January 24, 2009, 9:07 am
Some folks just totally determined that they know what the
problem is. And that you, the experienced tech, don't know.

Would have made for a good laugh, if you'd left the saggy
flue pipe in. Wait for trouble, and then go back and redo
the flue pipe. However, she'd likely call some other tech,
and your reputation would be smeared.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
.


On Wed, 21 Jan 2009 23:08:35 -0500, "Stormin Mormon"

>When I used to do installs, once in a while, the boss would
>ask us to take a furnace out neat and tidy. He knows some
>landlords who can use furnace in good condition. I'm very
>pleased you put the "trouble unit" to good use.


I did my best to convince the HO that she didn't need a new
furnace
but she was insistent about it so she got what she wanted.



Posted by The King on January 24, 2009, 9:24 am
On Sat, 24 Jan 2009 09:07:53 -0500, "Stormin Mormon"

>Some folks just totally determined that they know what the
>problem is. And that you, the experienced tech, don't know.
>Would have made for a good laugh, if you'd left the saggy
>flue pipe in. Wait for trouble, and then go back and redo
>the flue pipe. However, she'd likely call some other tech,
>and your reputation would be smeared.

Wait for trouble? Did you not see where I wrote that it would not
close the pressure switch from the get go because the exhaust was
already full of water?

Are you suggesting that I should have drained the exhaust pipe, put it
back on the furnace and call it good knowing that it would soon fail?

Don't be ridiculous.



Posted by HVAC on January 24, 2009, 9:58 am

> Would have made for a good laugh, if you'd left the saggy
> flue pipe in. Wait for trouble, and then go back and redo
> the flue pipe.

The you could *really* get a good laugh
at the customers who died of CO poisoning.
Look down at the dead bodies and say, "I told you so".

Good one, Stormy.



Page 3 of 5       < 1 2 3 > last >>
Similar ThreadsPosted
Furnace life expectancy, recommened brands June 3, 2007, 12:40 pm
Clay Radiant Heater Fired by Bituminous Coal -- any Real-Life example? September 11, 2009, 9:00 pm
Igniter on furnace - how to replace February 16, 2008, 1:02 pm
Furnace not igniting (Comfortmaker RPJ II - electronic igniter) October 27, 2006, 8:56 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap