Home Page link

Lennox G16 blower removal

Home| Search | About
Login Password
Register Now! Lost Password?

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 1 of 3       1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Lennox G16 blower removal smcgroty 02-15-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by smcgroty on February 15, 2007, 6:28 pm
Can the blower motor in a Lennox G16 be removed from the heater
without disassembling the entire unit? The fan/motor assembly looks to
be mounted on flanges hanging from the top of the bottom chamber, but
it seems the bolts can only be accessed from inside the burner
compartment.


Posted by Bubba on February 15, 2007, 6:40 pm

>Can the blower motor in a Lennox G16 be removed from the heater
>without disassembling the entire unit? The fan/motor assembly looks to
>be mounted on flanges hanging from the top of the bottom chamber, but
>it seems the bolts can only be accessed from inside the burner
>compartment.

Nope. CAnt be done. Every screw on that furnace has to come out before
you can get to the blower. Be sure you turn the electric off first.
Its about a 4-5hr job. Good luck. Label all the parts and screws with
tape in order. They are all different sizes. Lay them out on a white
sheet and label them all. Take good notes and pictures will help.
Bubba

Posted by danger@heat.com on February 15, 2007, 8:23 pm
That's a pulse, perhaps the easiest furnace to remove the blower on.
Look underneath, in the blower compartment, on both sides near the front, you
will see two 7/16" bolts. Just take the 2 bolts out and the blower slides out
of the track. Sounds like you were about to take the track out too!

Have you had a pulse test recently? What year is the furnace?

-Canadian Heat


--
--------------------------------- --- -- -
Posted with NewsLeecher v3.8 Final
Web @ http://www.newsleecher.com/?usenet
------------------- ----- ---- -- -


Posted by Oscar_Lives on February 15, 2007, 11:26 pm

> Can the blower motor in a Lennox G16 be removed from the heater
> without disassembling the entire unit? The fan/motor assembly looks to
> be mounted on flanges hanging from the top of the bottom chamber, but
> it seems the bolts can only be accessed from inside the burner
> compartment.
>

You need to order a burner-bolt wrench from Lennox Tools, Inc.



Posted by =?ISO-8859-1?Q?Tekkie=AE?= on February 16, 2007, 9:02 pm
Oscar_Lives wrote:
>> Can the blower motor in a Lennox G16 be removed from the heater
>> without disassembling the entire unit? The fan/motor assembly looks to
>> be mounted on flanges hanging from the top of the bottom chamber, but
>> it seems the bolts can only be accessed from inside the burner
>> compartment.
>>
>
> You need to order a burner-bolt wrench from Lennox Tools, Inc.
>
>
Wrench-BoosterŪ from Snatch-On

Page 1 of 3       1 2 3 > last >>
Similar ThreadsPosted
Removal of old whole house attic fan January 26, 2007, 9:56 pm
Will non-lennox brands work for independent humidity control in a Lennox system May 2, 2007, 4:34 pm
Need Blower Controller July 31, 2006, 2:32 am
Blower On Delay October 16, 2006, 7:56 am
Weak blower? December 24, 2006, 6:00 pm
Re: Blower Fan Motor April 11, 2006, 10:21 pm
fan blower runs continually December 19, 2006, 10:37 am
Inside blower not coming on May 28, 2007, 7:29 pm
reasons blower fails to low August 12, 2007, 11:54 am
My blower and compressor are always running October 8, 2007, 12:44 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap