Home Page link

Lennox pulse 21

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 3 of 3       << first < 1 2 3 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Lennox pulse 21 whiteoak 12-30-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Bubba on December 31, 2006, 1:36 pm
On 31 Dec 2006 10:07:14 -0800, "Power's Mechanical"

>
>Bubba wrote:
>> On 31 Dec 2006 06:45:06 -0800, "Power's Mechanical"
>>
>> >
>> >Bubba wrote:
>> >> On 31 Dec 2006 05:20:54 -0800, "Power's Mechanical"
>> >>
>> >> >
>> >> >Bubba wrote:
>> >> >>
>> >> >> >Hey Group
>> >> >> >
>> >> >> >It's a lennox pulse mounted horizonally in about a three ft. high crawl
>> >> >> >space. I think this'll be it's 8th season to heat........ maybe ten ??
>> >> >> >It's been a pretty good replacement for the old oil burner that i'd
>> >> >> >gotten 20 years average service out of .... But .... it's not been
>> >> >> >completely trouble free either :-( In the past four years it's had
>> >> >> >three
>> >> >> >grimlins in it. No ....... one repeated it's self.
>> >> >> >
>> >> >> >I need to say that I had my programmable Emerson thermostat ( bought in
>> >> >> >'93 ) that was used on the oil burner installed on the Lennox when I
>> >> >> >the furnaces were swapped.
>> >> >> >
>> >> >> >Now ..... Into about the third year of service, my Gas / Appliance
>> >> >> >dealer sold out to a larger company ??............. along about then is
>> >> >> >when the blower on the Lennox started to ocasionally
>> >> >> >"run on " , best I remember we couldn't stop it running at the
>> >> >> >thermostat ........ had to go kill the main power at the breakerbox.
>> >> >> >I got up with the ex-dealer and he told me to put a couple drops of oil
>> >> >> >on the limit switch shaft where it turns in it's pivots ........ This
>> >> >> >seemed to help, but by that time heating season was over, and the
>> >> >> >Moncrief AC, combined with the Lennox blower did a great job all
>> >> >> >summer.
>> >> >> >
>> >> >> >Then I believe I had a trouble free heating season.??
>> >> >> >That gets me to last year, more than once I'd have to tinker with the
>> >> >> >thermostat and finally the main breaker to get the burner going.
>> >> >> >
>> >> >> >Again a trouble free cooling season in '06
>> >> >> >
>> >> >> >Now, into this heating season,'06 / '07 the burner is failing to start
>> >> >> >again. I've replaced the old
>> >> >> >Emerson programmable thermostat three weeks ago with a solid state non
>> >> >> >programmable "Hunter"
>> >> >> >Thermostat.
>> >> >> >
>> >> >> >Now, ocassionally, without touching the thermostat, I've had to go to
>> >> >> >the main breaker box, shut the power off and back on........ wait for
>> >> >> >the min.or two for the burner to fire and run ??
>> >> >> >
>> >> >> >Hope I've not left anything out ?? .... The need for turning off of the
>> >> >> >power is what's puzzling me ??
>> >> >> >
>> >> >> >Any Ideas out there?
>> >> >> >
>> >> >> >Much Obliged :-)
>> >> >> >
>> >> >> >" WHITEOAK "
>> >> >>
>> >> >> "Life's a bitch". Get over it.
>> >> >> Call a tech that knows how to service oil.
>> >> >> While you're at it..........replace the furnace, air conditioner and
>> >> >> thermostat.
>> >> >> Bubba
>> >> >
>> >> >What does a oil burner tech have to do with a Lennox pulse gas furnace?
>> >>
>> >> I guess you miissed his whole post. Read it again.
>> >> It is a total mish mash of chit. He is doing it all himself.
>> >> He even puts oil on the shaft of his fan/limit control??
>> >> Then there is more babbling about his ac.
>> >> He thinks his breaker and stat is his problem so he changes his stat??
>> >> Seems perfectly normal to me to go find an oil tech to work on his gas
>> >> appliance.
>> >> Its all about "cheap".
>> >> Are you following along now?
>> >> Bubba
>> >
>> >Yeah your being the typical asshole that you normally are..
>>
>> Glad you noticed.
>> Now go fuck yourself. Then when you're finished you can "Blow Me".
>> Bubba
>
>Pretty sensivitive for a crook arent ya.

Not at all. I just think you should go fuck yourself.
Not too hard to comprehend is it?
Bubba

PexSupply PEX Tools 468x60
Posted by Johnny V. Mullins on December 31, 2006, 2:56 pm


I bet $$$$$ someone keeps pissing in bubbas Cherrios, HAR-HAR-HAR !! HE
pisses and moans more than that bunch of dimwits on CB radio !!

uncabud

----------------------------------------------------------------------------------------------------------------------------------------------------------


> On 31 Dec 2006 10:07:14 -0800, "Power's Mechanical"
>
>>
>>Bubba wrote:
>>> On 31 Dec 2006 06:45:06 -0800, "Power's Mechanical"
>>>
>>> >
>>> >Bubba wrote:
>>> >> On 31 Dec 2006 05:20:54 -0800, "Power's Mechanical"
>>> >>
>>> >> >
>>> >> >Bubba wrote:
>>> >> >> wrote:
>>> >> >>
>>> >> >> >Hey Group
>>> >> >> >
>>> >> >> >It's a lennox pulse mounted horizonally in about a three ft. high
>>> >> >> >crawl
>>> >> >> >space. I think this'll be it's 8th season to heat........ maybe
>>> >> >> >ten ??
>>> >> >> >It's been a pretty good replacement for the old oil burner that
>>> >> >> >i'd
>>> >> >> >gotten 20 years average service out of .... But .... it's not
>>> >> >> >been
>>> >> >> >completely trouble free either :-( In the past four years it's
>>> >> >> >had
>>> >> >> >three
>>> >> >> >grimlins in it. No ....... one repeated it's self.
>>> >> >> >
>>> >> >> >I need to say that I had my programmable Emerson thermostat (
>>> >> >> >bought in
>>> >> >> >'93 ) that was used on the oil burner installed on the Lennox
>>> >> >> >when I
>>> >> >> >the furnaces were swapped.
>>> >> >> >
>>> >> >> >Now ..... Into about the third year of service, my Gas /
>>> >> >> >Appliance
>>> >> >> >dealer sold out to a larger company ??............. along about
>>> >> >> >then is
>>> >> >> >when the blower on the Lennox started to ocasionally
>>> >> >> >"run on " , best I remember we couldn't stop it running at the
>>> >> >> >thermostat ........ had to go kill the main power at the
>>> >> >> >breakerbox.
>>> >> >> >I got up with the ex-dealer and he told me to put a couple drops
>>> >> >> >of oil
>>> >> >> >on the limit switch shaft where it turns in it's pivots ........
>>> >> >> >This
>>> >> >> >seemed to help, but by that time heating season was over, and the
>>> >> >> >Moncrief AC, combined with the Lennox blower did a great job all
>>> >> >> >summer.
>>> >> >> >
>>> >> >> >Then I believe I had a trouble free heating season.??
>>> >> >> >That gets me to last year, more than once I'd have to tinker with
>>> >> >> >the
>>> >> >> >thermostat and finally the main breaker to get the burner going.
>>> >> >> >
>>> >> >> >Again a trouble free cooling season in '06
>>> >> >> >
>>> >> >> >Now, into this heating season,'06 / '07 the burner is failing to
>>> >> >> >start
>>> >> >> >again. I've replaced the old
>>> >> >> >Emerson programmable thermostat three weeks ago with a solid
>>> >> >> >state non
>>> >> >> >programmable "Hunter"
>>> >> >> >Thermostat.
>>> >> >> >
>>> >> >> >Now, ocassionally, without touching the thermostat, I've had to
>>> >> >> >go to
>>> >> >> >the main breaker box, shut the power off and back on........ wait
>>> >> >> >for
>>> >> >> >the min.or two for the burner to fire and run ??
>>> >> >> >
>>> >> >> >Hope I've not left anything out ?? .... The need for turning off
>>> >> >> >of the
>>> >> >> >power is what's puzzling me ??
>>> >> >> >
>>> >> >> >Any Ideas out there?
>>> >> >> >
>>> >> >> >Much Obliged :-)
>>> >> >> >
>>> >> >> >" WHITEOAK "
>>> >> >>
>>> >> >> "Life's a bitch". Get over it.
>>> >> >> Call a tech that knows how to service oil.
>>> >> >> While you're at it..........replace the furnace, air conditioner
>>> >> >> and
>>> >> >> thermostat.
>>> >> >> Bubba
>>> >> >
>>> >> >What does a oil burner tech have to do with a Lennox pulse gas
>>> >> >furnace?
>>> >>
>>> >> I guess you miissed his whole post. Read it again.
>>> >> It is a total mish mash of chit. He is doing it all himself.
>>> >> He even puts oil on the shaft of his fan/limit control??
>>> >> Then there is more babbling about his ac.
>>> >> He thinks his breaker and stat is his problem so he changes his
>>> >> stat??
>>> >> Seems perfectly normal to me to go find an oil tech to work on his
>>> >> gas
>>> >> appliance.
>>> >> Its all about "cheap".
>>> >> Are you following along now?
>>> >> Bubba
>>> >
>>> >Yeah your being the typical asshole that you normally are..
>>>
>>> Glad you noticed.
>>> Now go fuck yourself. Then when you're finished you can "Blow Me".
>>> Bubba
>>
>>Pretty sensivitive for a crook arent ya.
>
> Not at all. I just think you should go fuck yourself.
> Not too hard to comprehend is it?
> Bubba

--------------------------------------------------------------------------------
I am using the free version of SPAMfighter for private users.
It has removed 16 spam emails to date.
Paying users do not have this message in their emails.
Try SPAMfighter for free now!



Posted by DIMwit on January 1, 2007, 8:21 am
Johnny,

Yeah, Bubba seems more than a little grouchy the past week or so. Normally
his wit has some humor in it. He is a "hard worker".

But speaking of wit, please watch what you say about dimwits, OK? You want
to hurt my feelings? :-)

After last night, the only feelings I have is a severe headache and Hershey
squirts.

Happy New Year.


>
>
> I bet $$$$$ someone keeps pissing in bubbas Cherrios, HAR-HAR-HAR !! HE
> pisses and moans more than that bunch of dimwits on CB radio !!
>
> uncabud
>
>
----------------------------------------------------------------------------------------------------------------------------------------------------------
>
>
>> On 31 Dec 2006 10:07:14 -0800, "Power's Mechanical"
>>
>>>
>>>Bubba wrote:
>>>> On 31 Dec 2006 06:45:06 -0800, "Power's Mechanical"
>>>>
>>>> >
>>>> >Bubba wrote:
>>>> >> On 31 Dec 2006 05:20:54 -0800, "Power's Mechanical"
>>>> >>
>>>> >> >
>>>> >> >Bubba wrote:
>>>> >> >> wrote:
>>>> >> >>
>>>> >> >> >Hey Group
>>>> >> >> >
>>>> >> >> >It's a lennox pulse mounted horizonally in about a three ft.
>>>> >> >> >high
>>>> >> >>
>>>> >> >> "Life's a bitch". Get over it.
>>>> >> >> Call a tech that knows how to service oil.
>>>> >> >> While you're at it..........replace the furnace, air conditioner
>>>> >> >> and
>>>> >> >> thermostat.
>>>> >> >> Bubba
>>>> >> >
>>>> >> >What does a oil burner tech have to do with a Lennox pulse gas
>>>> >> >furnace?
>>>> >>
>>>> >> I guess you miissed his whole post. Read it again.
>>>> >> It is a total mish mash of chit. He is doing it all himself.
>>>> >> He even puts oil on the shaft of his fan/limit control??
>>>> >> Then there is more babbling about his ac.
>>>> >> He thinks his breaker and stat is his problem so he changes his
>>>> >> stat??
>>>> >> Seems perfectly normal to me to go find an oil tech to work on his
>>>> >> gas
>>>> >> appliance.
>>>> >> Its all about "cheap".
>>>> >> Are you following along now?
>>>> >> Bubba
>>>> >
>>>> >Yeah your being the typical asshole that you normally are..
>>>>
>>>> Glad you noticed.
>>>> Now go fuck yourself. Then when you're finished you can "Blow Me".
>>>> Bubba
>>>
>>>Pretty sensivitive for a crook arent ya.
>>
>> Not at all. I just think you should go fuck yourself.
>> Not too hard to comprehend is it?
>> Bubba



Page 3 of 3       << first < 1 2 3
Similar ThreadsPosted
Lennox Pulse 21 Fan Control December 16, 2006, 4:52 pm
Will non-lennox brands work for independent humidity control in a Lennox system May 2, 2007, 4:34 pm
lennox a/c June 29, 2007, 7:41 pm
Why (again) would you own a Lennox? February 15, 2007, 6:37 pm
Lennox Heater Fan.. April 15, 2007, 11:55 am
Central Air- Lennox? May 25, 2007, 4:05 pm
LENNOX L Connection October 22, 2007, 3:39 pm
Lennox Condensor fan-Capacitor July 26, 2006, 12:04 pm
Help with Lennox coil sizing August 30, 2006, 8:50 pm
Lennox Compressor Cutting Out September 3, 2006, 12:23 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap