Home Page link

Mr Slim - PUH (outside unit)

Home| Search | About
Login Password
Register Now! Lost Password?

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 1 of 3       1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Mr Slim - PUH (outside unit) Kitch 09-22-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Kitch on September 22, 2007, 6:52 pm
I'd like to know if anyone has the answer. Outdoor unit, wired
correcty (both unit's power and DC voltage from & to each unit were
ok), both transformers performing well. Have had no trouble for 4 or
5 years. Till the other day - outdoor unit will not come up. Shows
P8 on controller display. LED 2 blinking on outdoor control (phase
open) BUT per tech book and company rep this LED error means nothing
on this model. Checked ALL saftey controls (thermisters) - OK. Unit
is single phase 208v. All I did is swap the power leads (208v single
phase) and the unit lit up like a christmas tree. Working great now.
Rep could not explain it. Does anyone have an explanation and I
already know I was lucky. AND it's good to see your doing well Paul,
I haven't posted here since '97.

Anthony


Posted by on September 22, 2007, 10:47 pm


> AND it's good to see your doing well Paul,
> I haven't posted here since '97.


Trying to renew your minion dues? :-)



Posted by on September 22, 2007, 10:52 pm

>
>
>> AND it's good to see your doing well Paul,
>> I haven't posted here since '97.
>
>
>Trying to renew your minion dues? :-)
>

        All major CC's still accepted ! :-)


--
Click here every day to feed an animal that needs you today !!!
http://www.theanimalrescuesite.com/

Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo now available online http://pmilligan.net/palm/

Posted by Zyp on September 23, 2007, 12:27 am
Kitch wrote:
> I'd like to know if anyone has the answer. Outdoor unit, wired
> correcty (both unit's power and DC voltage from & to each unit were
> ok), both transformers performing well. Have had no trouble for 4 or
> 5 years. Till the other day - outdoor unit will not come up. Shows
> P8 on controller display. LED 2 blinking on outdoor control (phase
> open) BUT per tech book and company rep this LED error means nothing
> on this model. Checked ALL saftey controls (thermisters) - OK. Unit
> is single phase 208v. All I did is swap the power leads (208v single
> phase) and the unit lit up like a christmas tree. Working great now.
> Rep could not explain it. Does anyone have an explanation and I
> already know I was lucky. AND it's good to see your doing well Paul,
> I haven't posted here since '97.
>
> Anthony

208 single phase? Not 230 / 208 ?

--
Zyp



Posted by Kitch on September 23, 2007, 8:51 am
>
> 208 single phase? Not 230 / 208 ?
>
> --
> Zyp

Unit is 208/230 single phase, but 208 single phase is our supply
voltage.

Kitch


Page 1 of 3       1 2 3 > last >>
Similar ThreadsPosted
Mr Slim vs Halcyon September 24, 2006, 4:04 pm
anyne work with a Mitsubishi Mr. Slim? August 3, 2006, 12:16 am
thermostat calibration for Mitsubishi Mr. Slim? September 4, 2007, 7:21 pm
Size of A/C Unit July 1, 2006, 3:22 pm
Leaking Unit July 27, 2006, 11:53 pm
A/C unit coil August 8, 2006, 9:40 pm
Unit heater BTU October 31, 2006, 1:44 pm
Re: Old a/c unit, never used, still good? May 20, 2007, 4:30 pm
Puron vs. R22 in new AC unit June 7, 2007, 4:05 pm
Bev Air Salad unit October 4, 2007, 9:37 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap