|
Posted by on May 3, 2007, 12:22 am
On 3 May, 00:10, iwon...@zoominternet.net wrote:
> On 2 May, 23:54, .p.jm@see_my_sig_for_address.com wrote:
>
>
>
> > Oooh ! little pissy union-bitch hack-boi is upset ! :-)
>
> > On 2 May 2007 20:39:55 -0700, iwon...@zoominternet.net wrote:
>
> > >On 2 May, 23:11, .p.jm@see_my_sig_for_address.com wrote:
> > >> On 2 May 2007 19:51:26 -0700, iwon...@zoominternet.net wrote:
>
> > >> >you guys (and Girls) no your stuff! Could someone please help me out
> > >> >and give me some answers or at least an opinion. Do you think it's
>
> > >> OK, if you insist -
>
> > >> You're a cheap-assed fuckin union hack, who is determined to
> > >> take some used piece of bullshit and do a half-assed job of installing
> > >> it. It will be a fucking miracle if you don't get someone hurt.
>
> > >> >worth the time and money installing this equipment. I only paid
> > >> >$150.00 for everything. I'm a union Sheet Metal Worker and can install
> > >> >everything myself. The only thing I will need to pay for is the line
> > >> >set, electrical supplies such as 220 line, seal-tight, and disconnect
> > >> >box. I might buy a pad too if I feel lazy and it's cheap enough. LOL!
> > >> >What do you suggest I use for wire? I was going to use 10/2 but a
>
> > >> I suggest sticking a nice # 6 ground rod up your ass.
>
> > >> >"Sparky" friend of mine told me to use #8. I will also need to have
> > >> >someone evacuate the system and charge it for me, thanks to my
> > >> >neighbor who cut the lines and let all the CFC's out. Our ozone thanks
> > >> >him! :( He did not want to pay for someone to recover the gas. I have
>
> > >> Are you two perhaps related, in ways that the law disallows
> > >> for reasons of genetic damage ?
>
> > >> >no gauges or vaccume pump or access to the R-22 needed to fill it.
> > >> >Does anyone know how much it will take to fill this system, and a
> > >> >round about figure for someone to pump it down and charge it? One last
>
> > >> $ 17,000. The freon is included.
>
> > >> >question: Is there a way to test these pieces to make sure that they
> > >> >work, BEFORE I install them?
>
> > >> Test them with the ground rod. Shove 'em right up there.
>
> > >> >Thanks for the help
>
> > >> No problem.
>
> > >> >I-Wonder
>
> > >> --
> > >> Click here every day to feed an animal that needs you today
!!!http://www.theanimalrescuesite.com/
>
> > >> Paul ( pjm @ pobox . com ) - remove spaces to email me
> > >> 'Some days, it's just not worth chewing through the restraints.'
> > >> 'With sufficient thrust, pigs fly just fine.'
> > >> HVAC/R program for Palm PDA's
> > >> Free demo now available onlinehttp://pmilligan.net/palm/
>
> > >What's up with all you FUCKING SCABS! Can't you find another SCAB to
> > >pick on! All I asked for was some friendly advice! You act like I'm
> > >the plague. What are you afraid of! Oh I know, It's my 5 years of
> > >expert training plus 15 years of commercial job experience. VS. your
> > >PIDDLY ASS residential installs that a FUCKING MORON could do with a
> > >few hours of training. You SACBS couldn't Layout a fitting (or a piece
> > >of duct for that matter) if your life depended on it! I have been on
> > >many jobs where we had to totally rip out what you SCABS put in
> > >because it would not pass inspection. You DUMB FUCKS can't even read a
> > >print (PRINT, yea that's what I said. Have you ever heard of one of
> > >those) You know that bunch of papers you look at to see where the duct
> > >goes. I'd like to see one of you SCABS take a print, make a cut sheet
> > >for all the fittings and duct for a 8 story high rise. Then size it
> > >all, lay it out, make it, and install it! Now if there are any adults
> > >out there who are not afraid of me coming to take your job from you,
> > >please kindly answer my question.
> > >I only claim to be an expert in Sheet Metal. Not Every trade, like you
> > >FUCKING SCABS
> > >You no what they say JACK OFF OF ALL TRADES, MASTER OF NONE!
> > >Have a Nice Day JACK OFFS!
>
> > --
> > Click here every day to feed an animal that needs you today
!!!http://www.theanimalrescuesite.com/
>
> > Paul ( pjm @ pobox . com ) - remove spaces to email me
> > 'Some days, it's just not worth chewing through the restraints.'
> > 'With sufficient thrust, pigs fly just fine.'
> > HVAC/R program for Palm PDA's
> > Free demo now available onlinehttp://pmilligan.net/palm/
>
> NO I'm not upset. The way you assholes are acting it sounds like your
> the ones with the problems.
> If I'm the hack why do I get paid $40.00 per hr. to do my job! Smart
> constructions managers know the type of work they get from us and are
> more than willing to pay us. They also no what type of work they get
> from you SCABS. Even when your low bidder you still can't get the job!
> That's because the General Contractor knows he will have to pay again
> to tear it out and get it installed the right way! What's wrong is
> that $8.00 an hour making life a little hard for you. Your dumb ass
> can't even spell. It's PUSSY BOY! not pissy boi you DUMB FUCKING
> SCAB! Thanks You proved my point for me again!
Sorry Scabs but the fun is over. It's getting late and I have to go to
bed. Some of us have JOBS, and need to get up in the morning. I see
that you SCABS have a lot of free time on your hands! Since no one
will hire you, and you don't have any where to be in the morning you
can sit up all night typing on your keyboard. Have fun :) I'll be back
tomorrow if your mommy will let you come out to play I'll see you
then. Good night SCABS!
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap