Noisy Amana Air Command 90 furnace

Posted by ackermanj1 on January 2, 2009, 11:31 am

I have an Amana Air Command 90 furnace, about 13 years old. ModelGUC/GUX
(UPFLOW). There is a very loud buzzing or vibration soundcoming from (I
believe) the vent blower motor, possibly from the rightside or lower right
side of it as I face it. I'm thinking that Ishould replace the motor, but
I'm wondering if it might be somethingelse. Otherwise, furnace seems to be
working fine. Any thoughts or ideas?

-------------------------------------

##-----------------------------------------------##
Delivered via http://www.thestuccocompany.com/
Building Construction and Maintenance Forum
Web and RSS access to your favorite newsgroup -
alt.hvac - 27440 messages and counting!
##-----------------------------------------------##

Posted by Bubba on January 2, 2009, 1:18 pm

Yeah, its the motor. Go ahead and replace it. While you are at it, I
can see from here that your thermostat is bad too so go ahead and
replace that too.
By the way, your car is making some noise too. Get a new transmission
and that should cure it.
Anything else you have that needs fixing?
Bubba

On 02 Jan 2009 16:31:33 GMT, ackermanj1_at_lycos_dot_com@foo.com
(ackermanj1) wrote:

>I have an Amana Air Command 90 furnace, about 13 years old. ModelGUC/GUX
>(UPFLOW). There is a very loud buzzing or vibration soundcoming from (I
>believe) the vent blower motor, possibly from the rightside or lower right
>side of it as I face it. I'm thinking that Ishould replace the motor, but
>I'm wondering if it might be somethingelse. Otherwise, furnace seems to be
>working fine. Any thoughts or ideas?
>-------------------------------------
>##-----------------------------------------------##
>Delivered via http://www.thestuccocompany.com/
>Building Construction and Maintenance Forum
>Web and RSS access to your favorite newsgroup -
>alt.hvac - 27440 messages and counting!
>##-----------------------------------------------##

Posted by Steve on January 2, 2009, 10:01 pm

Its broken.

Posted by on January 2, 2009, 10:12 pm

wrote:

>>I have an Amana Air Command 90 furnace, about 13 years old. ModelGUC/GUX
>> (UPFLOW). There is a very loud buzzing or vibration soundcoming from (I
>> believe) the vent blower motor, possibly from the rightside or lower right
>> side of it as I face it. I'm thinking that Ishould replace the motor, but
>> I'm wondering if it might be somethingelse. Otherwise, furnace seems to be
>> working fine. Any thoughts or ideas?

>Its broken.

Maybe it's just buzzed.

--
Click here every day to feed an animal that needs you today !!!
www.theanimalrescuesite.com/

Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo online at www.pmilligan.net/palm/
Free 'People finder' program now at www.pmilligan.net/finder.htm

Posted by Jim Dandy on January 2, 2009, 10:51 pm

You got a bee in your bonnet?

Page 1 of 2 1 2 > last >>

Similar Threads	Posted
Does Amana put TXVs in any outdoor units; wire grill vs. metal louvers; Amana RHF	August 20, 2006, 4:27 am
Parker/Carrier PC Command Center Software FS on Ebay	September 19, 2006, 6:25 pm
Noisy fan	July 2, 2006, 7:59 pm
Trane air handler too noisy	July 30, 2006, 9:12 pm
stupid nubee question regarding noisy compressor	July 13, 2007, 8:47 am
Who's got one of these? (Amana pressure switch)	February 12, 2008, 7:12 pm
2 ton amana split system	January 18, 2009, 7:21 pm
Replacing Heating and Air - Amana Units	November 29, 2006, 3:26 am
Need parts sources for Amana HTM Plus system	December 9, 2006, 4:06 pm
Amana 4 ton condenser blower motor	July 11, 2007, 1:37 am