Home Page link

R410a

Home| Search | About
Login Password
Register Now! Lost Password?

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 2 of 4       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
R410a Alain 07-09-2007
---> Re: R410a Lloyd E. Sponen...07-10-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Geoman on July 9, 2007, 10:36 pm

>
>> OR FORGETS TO BRAZE A FITTING !!!
> Ok ,I did that today but you put the drier in backwards- heat related
> stress ;-)

I usually flare the tubing without the flare nut too LOL !


>>
>>
>>>
>>>> Can some of the new systems with R-410A leak because of the higher
>>> working
>>>> pressures ?
>>>
>>>
>>> Any system can leak because of pressures.... usually they're caused by
>>> an
>>> installer that cuts corners to get the job done quickly!
>>>
>>>
>>
>>
>
>



Posted by on July 9, 2007, 11:27 pm

>
> >
> >> OR FORGETS TO BRAZE A FITTING !!!
> > Ok ,I did that today but you put the drier in backwards- heat related
> > stress ;-)
>
> I usually flare the tubing without the flare nut too LOL !


Been there, done that.... :-(



Posted by Zephyr on July 10, 2007, 11:27 am
BTW: How do you stretch the copper after you cut the flare off? I know the
duct stretcher doesn't work on refrigeration lines.

--
Zyp

>
> >
> > >
> > >> OR FORGETS TO BRAZE A FITTING !!!
> > > Ok ,I did that today but you put the drier in backwards- heat related
> > > stress ;-)
> >
> > I usually flare the tubing without the flare nut too LOL !
>
>
> Been there, done that.... :-(
>
>



Posted by on July 10, 2007, 12:32 pm

> BTW: How do you stretch the copper after you cut the flare off? I know
the
> duct stretcher doesn't work on refrigeration lines.


Stretch it???



Posted by Butch Duckhead on July 9, 2007, 11:58 pm

>
> >
> >> OR FORGETS TO BRAZE A FITTING !!!
> > Ok ,I did that today but you put the drier in backwards- heat related
> > stress ;-)
>
> I usually flare the tubing without the flare nut too LOL !
>

Or putting it on upside down.

--






Page 2 of 4       < 1 2 3 > last >>
Similar ThreadsPosted
Re: R410a hoses?? August 30, 2006, 12:34 pm
Re: R410a hoses?? August 31, 2006, 9:05 am
R-22 vs. R410a (Puron) May 16, 2007, 1:03 pm
Re: Compressor noise R22 vs R410A September 28, 2006, 2:08 pm
Re: Compressor noise R22 vs R410A September 28, 2006, 11:02 pm
Compressor noise R22 vs R410A September 24, 2006, 2:43 am
Arcoair 13 Seer R410A 3 Ton July 28, 2008, 12:01 pm
A/C replacement unit, Freon or R410A? July 16, 2007, 9:07 pm
r410a capacity in a typical model minisplit March 30, 2008, 8:42 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap