Home Page link

Re: Cracked Heat Exchanger, Soot Again - HELP!!

HVAC Discussions - Heating, ventilation and air conditioning. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Re: Cracked Heat Exchanger, Soot Again - HELP!! Oscar_Lives 04-12-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Oscar_Lives on April 12, 2006, 7:30 am

>I have two propane furnaces (both Nordyne, both installed 4 years ago).
> The one upstairs is a smaller unit (only heating 1500 sq. feet) and
> has never given me a moment of trouble. The heating unit downstairs is
> located in my basement and is a much larger unit. My basement is
> simply a dirt floor and stays slightly damp most of the year.
>
> Just FYI: My propane storage tank is very old. The propane lines
> coming into the house and supplying all my appliances are new (replaced
> 2 years ago).
>
> Okay, last winter I noticed a funny smell in the house. Turns out the
> entire downstairs heating system was coated in soot and the heat
> exchanger was cracked. The heating people replaced the heat exchanger.
>
> Four weeks ago, I noticed the funny smell again. Guess what! Soot and
> a cracked heat exchanger.
>
> Also, I was told by the heating people that allowing my propane tank to
> go below 30% causes reduced pressure and incomplete combustion. He
> told me this possibly caused the problem. Is this true? I really
> believe the problem is with the heating unit itself because my upstairs
> unit is fine and clean.
>
> Is it possible that something else is wrong with the heating unit (i.e.
> pressure regulator) that could cause this?
>
> Thanks for any help you can give.
>
> Holly
>

Could be a bad pressure regulator, but I would focus on the propane lines.
Flush them well with denatured alcohol and see if that fixes it.

If the problem still exists, get a new digital thermostat and run a ground
loop to the nearest water pipe. You can do this yourself--it isn't nearly
as hard as it sounds. The more expensive digital thermostats have the "G"
terminal and the instructions are printed in the manual inside the package.

Let us know how it turns out.



Similar ThreadsPosted
soot in heat exchanger March 10, 2007, 10:01 am
Re: Cracked heat exchanger March 14, 2007, 7:00 pm
Heat Exchanger October 16, 2007, 4:12 pm
Heat Exchanger question July 5, 2006, 11:17 am
heat exchanger noise March 3, 2007, 3:46 pm
Goodman Manufacturing- fire box- heat exchanger April 10, 2007, 7:07 pm
GAMA OR AGA Heat Exchanger Condemn Guidelines January 22, 2008, 8:12 pm
Book of Furnace Heat Exchanger Failure July 1, 2008, 7:09 pm
Question about Cast Iron Heat Exchanger condensation? July 30, 2006, 1:29 pm
Large commercial hot water heat exchanger leaking November 9, 2007, 4:49 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap