|
Posted by CJT on February 3, 2007, 9:01 pm
Bubba wrote:
>
>
>>Bubba wrote:
>>
>>
>>>On 03 Feb 2007 05:04:28 GMT, DANgER (danger@heat.com) wrote:
>>>
>>>
>>>
>>>>LOL Bubba wrong again,
>>>>
>>>
>>>Yes you were WRONG, werent you DANgER?
>>>You know damn good and well you thought that furnace had a single
>>>flame sensor sitting over to the side of the burners all by itself. It
>>>DOESNT and you were WRONG fuckhead. You couldnt diagnose a pilot that
>>>wasnt lit. Go back outside and suck on the end of your tail pipe some
>>>more.
>>>
>>>
>>>
>>>>"I noticed that while the fan is on, the flame will go out for about 10
>>>>seconds, then relight, then on for perhaps a minute, then out, etc."
>>>>
>>>>It's intermitant ignition. His "pilot burner" includes the electrode that
>>>>both lights and senses flame. Like I said CLEAN IT!
>>>>You can measure micro amps on that furnace by disconnecting the transformer
>>>>ground and going in series with BRNR GRND terminal on the module.
>>>>
>>>>Sorry Duncan for not being more specific. It wasn't normal furnace
behaviour.
>>>>Chances are the module will fail next.
>>>
>>>
>>>Oh CHRIST! "not normal behavior??" Here we go with another Canuck wild
>>>ass guess. Time to change the module. Better change the gas valve too.
>>>While you're at it, change the blower motor. Dont forget a stat.
>>
>>As I recall, that was YOUR recommendation.
>
>
> ..........and if you were bright enough to follow along closely CJT
> you dipshit, you would recall that the dumb Canuck actually believes
> and uses that procedure. I dont.
> I can see you will need much help following along............
> Bubba
>
Go back and read it yourself -- you seem forgetful.
>
>>That
>>
>>>outta cover it the way the wild wonder from Canada "fixes" things.
>>>Bubba
>>>
>>>
>>>>-Canadian Heat
--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form che...@prodigy.net.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap