If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by on February 3, 2007, 11:47 am
>Curious, ever seen any of these ?
>http://www.kalamaprecision.com/misc/rheem.jpg
>230-1 60kbu single compressor.
Sam, FWIW, Steve is on vacation, starting with the AHR show in Dallas,
then a road trip thru several states to visit family & friends. We
took him out for dinner last night.....
|
|
Posted by Jeffrey Lebowski on February 3, 2007, 12:07 pm
> >Curious, ever seen any of these ?
> >http://www.kalamaprecision.com/misc/rheem.jpg
> >230-1 60kbu single compressor.
> Sam, FWIW, Steve is on vacation, starting with the AHR show in Dallas,
> then a road trip thru several states to visit family & friends. We
> took him out for dinner last night.....
Thx, Fish.
It's in the back of my truck right now--probly will take a closer look at
the internal design / construction details and post the actual model # later
today.
Btw, it's Ruud not Rheem ( though doubt that makes any difference )
--
|
|
Posted by Noon-Air on February 9, 2007, 2:59 am
>> >Curious, ever seen any of these ?
>> >http://www.kalamaprecision.com/misc/rheem.jpg
>> >230-1 60kbu single compressor.
>> Sam, FWIW, Steve is on vacation, starting with the AHR show in Dallas,
>> then a road trip thru several states to visit family & friends. We
>> took him out for dinner last night.....
> Thx, Fish.
> It's in the back of my truck right now--probly will take a closer look at
> the internal design / construction details and post the actual model #
> later
> today.
> Btw, it's Ruud not Rheem ( though doubt that makes any difference )
My Sister has Comcast so I can get caught up on the NG stuff.....there is no
differance between Rheem/RUUD. I do recommend ripping out the controls and
installing a DDC board....takes care of a lot of problems....including the
fact that they have not made the original defrost balord for that unit in 15
years. If it has the original fan motors, I would also recommend that you
replace them....yes they are both 825 or 850rpm.
|
|
Posted by Jeffrey Lebowski on February 9, 2007, 10:51 am
> >> >Curious, ever seen any of these ?
> >> >http://www.kalamaprecision.com/misc/rheem.jpg
> >> >230-1 60kbu single compressor.
> >> Sam, FWIW, Steve is on vacation, starting with the AHR show in Dallas,
> >> then a road trip thru several states to visit family & friends. We
> >> took him out for dinner last night.....
> > Thx, Fish.
> > It's in the back of my truck right now--probly will take a closer look
at
> > the internal design / construction details and post the actual model #
> > later
> > today.
> > Btw, it's Ruud not Rheem ( though doubt that makes any difference )
> My Sister has Comcast so I can get caught up on the NG stuff.....there is
no
> differance between Rheem/RUUD. I do recommend ripping out the controls and
> installing a DDC board....takes care of a lot of problems....including the
> fact that they have not made the original defrost balord for that unit in
15
> years.
Thx Steve,
From memory, there's no motorized timer--and there's at least a couple of
klixon...one with red leads and the other one with blue....I'll try and take
another look sometime today, do some investigation..
> If it has the original fan motors, I would also recommend that you
> replace them....yes they are both 825 or 850rpm.
One of the fans had been replaced with a fasco at some point....and yes,
recalling they run ~825
Compressor is inside of an insulated box and so don't know for sure whether
its a recip but judging from the box height I'd guess that it is.
Thx again,
--
SVL
|
|
Posted by Jeffrey Lebowski on February 9, 2007, 12:38 pm
> From memory, there's no motorized timer--and there's at least a couple of
> klixon...one with red leads and the other one with blue....I'll try and
take
> another look sometime today, do some investigation..
My mistake, those are thermisters and it has a ranco ddc already installed.
> > If it has the original fan motors, I would also recommend that you
> > replace them....yes they are both 825 or 850rpm.
> One of the fans had been replaced with a fasco at some point....and yes,
> recalling they run ~825
> Compressor is inside of an insulated box and so don't know for sure
whether
> its a recip but judging from the box height I'd guess that it is.
crk30325-pfv, nominal 4 ton
--
|
Page 1 of 2 1 2 > last >>
| Similar Threads | Posted | | Internet Retailers... and the guy "STEVE" | October 5, 2008, 11:35 am |
| Ping SVL | October 12, 2006, 11:56 pm |
| Ping SVL | October 23, 2006, 11:26 pm |
| Ping SVL.. | January 31, 2007, 2:06 pm |
| ping Oscar | February 19, 2007, 4:03 pm |
| Ping kjpro | May 23, 2007, 9:35 am |
| Ping Paul | July 25, 2007, 10:10 pm |
| Ping Paul | July 30, 2007, 9:02 pm |
| ping GEOMAN | August 4, 2007, 10:09 am |
| Ping Jake NEC Question | August 29, 2007, 9:43 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>http://www.kalamaprecision.com/misc/rheem.jpg
>230-1 60kbu single compressor.