|
Posted by Injun Ear on June 16, 2009, 8:04 am
The only thing the schematic shows is the heat pump end, not the air
handler end. It shows a picture of the terminals, but there is no P
terminal.
Rheem RPPB-036JAZ heat pump.
Rheem RBHK-24J14SHD air handler.
Noon-Air wrote:
> Apparently you can't read a schematic?? or the installation instructions??
> This is basic controls, with basic wiring.
> You do know that Rheem equipment RVs are energized in heat, I would hope
> What model heat pump??
> What model of air handler are you using with it??
> What control are you using with it??
>
>> Yes, I have a purple wire. But where does it hook up in the air
>> handler???
>> Noon-Air wrote:
>>> its the purple wire on Rheem/RUUD heat pumps to energize the strips
>>> when it goes into defrost.
>>>> Trying to hook up the defrost so it will energize some heat during
>>>> the defrost cycle. It says run a lead from D on the heat pump to P
>>>> on the
>>>> air handler. Only problem is, I seen no P terminal on the air
>>>> handler's
>>>> circuit board.
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> defrost cycle. It says run a lead from D on the heat pump to P on the
> air handler. Only problem is, I seen no P terminal on the air handler's
> circuit board.