Home Page link

Riello 40 and RF interference with ignitor

Home| Search | About
Login Password
Register Now! Lost Password?

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Riello 40 and RF interference with ignitor geo-in-md 01-20-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by geo-in-md on January 20, 2008, 9:19 pm
Hello, all...

I have a brand-new Solaia/Riello 40 that is probably getting shut off
by my amateur radio transmissions. The burner always will take off if
I reset the red button.. So far I have grounded the burner, control
box and furnace cover, and have put ferrite beads on all the external
wiring. Anyone else have this sort of problem, and did you FIX it?


Posted by Dr. Hardcrab on January 20, 2008, 10:00 pm

> Hello, all...
>
> I have a brand-new Solaia/Riello 40 that is probably getting shut off
> by my amateur radio transmissions. The burner always will take off if
> I reset the red button.. So far I have grounded the burner, control
> box and furnace cover, and have put ferrite beads on all the external
> wiring. Anyone else have this sort of problem, and did you FIX it?

Are you using the proper ferrite beads?

The nozzle size determines the proper ones to use....


Posted by -zero on January 20, 2008, 10:30 pm

> Hello, all...
>
> I have a brand-new Solaia/Riello 40 that is probably getting shut off
> by my amateur radio transmissions. The burner always will take off if
> I reset the red button.. So far I have grounded the burner, control
> box and furnace cover, and have put ferrite beads on all the external
> wiring. Anyone else have this sort of problem, and did you FIX it?

http://www.riello-burners.com/2_products/3_gas-burners/3a_40-series-gas-fired.asp

ROTFL! I'm imagining this GIANT home-brew transmission station.
If your burner fails every time you key-up,,,
check for Line side voltage drop at the burner. It shouldn't
drop at all.

-zero



Posted by Noon-Air on January 20, 2008, 10:40 pm

> Hello, all...
>
> I have a brand-new Solaia/Riello 40 that is probably getting shut off
> by my amateur radio transmissions. The burner always will take off if
> I reset the red button.. So far I have grounded the burner, control
> box and furnace cover, and have put ferrite beads on all the external
> wiring. Anyone else have this sort of problem, and did you FIX it?
>

Is the interference band or frequency specific?? if so, what bands are
suspect?? Are you running an amp?? What rig?? is everything in the shack
properly grounded?? are you having any RFI problems with anything else?? Do
you have access to a spectrum analyzer??
Need a lot more information.

de n6ojn





Posted by The Freon Cowboy on January 21, 2008, 7:52 am
"Is the interference band or frequency specific?? if so, what bands are
suspect?? Are you running an amp?? What rig?? is everything in the shack
properly grounded?? are you having any RFI problems with anything else?? Do
you have access to a spectrum analyzer??
Need a lot more information.

de n6ojn"


Ditto , de N9RZD




Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
Re: Trane furnace radio/TV interference November 10, 2006, 3:22 am
Re: Trane furnace radio/TV interference November 11, 2006, 11:48 pm
Radio interference from Bryant hi-ef furnace. February 11, 2007, 12:24 am
Ignitor failure December 29, 2007, 5:45 pm
Trane ignitor cost December 15, 2006, 7:13 pm
Hot Surface Ignitor replaced..still won't fire up.. August 3, 2006, 2:49 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap