|
Posted by John on July 17, 2006, 6:12 pm
>
>>
>>> This may not make you happy, but I have run into the same but I took
>>> pictures with my digital camera and sent them to the state inspection
>>> department to have them quite in dealing with the public and not having
>>> a license and insurance only to find out later they were connected to a
>>> apartment.
>>>
>>> In Texas if they are with a apartment maintenance they are legal. The
>>> only way they can get into trouble if they are caught doing work off the
>>> apartment property.
>>>
>>> Not too long ago I went to a review of the state codes and learned that
>>> Texas does not have a
>>> statue of limitations on side work. So if someone did some side work and
>>> 20 years down the road something goes wrong and lets say there had been
>>> a fire and the city also finds that a permit had not been pulled the
>>> insurance company does not have to pay.
>>>
>>>
>>>
>>> This is why I inform my friends to get a license contractor to do the
>>> work or even those who want to try to save money is to go down to the
>>> city hall to get a home owners permit. At least the city inspector will
>>> come by and check the work to be safe.
>>>
>>>
>>>
>>> Note: I do not mind in home owners trying to do work themselves because
>>> most of the time they have to pay extra to a contractor to fix their
>>> work. :-)
>>>
>>>
>>>
>>> And times are changing. You are now seeing quite a few cities in Texas
>>> that wants a copy of a heat load before you can replace a existing
>>> condensing unit or furnace and installing a new system to get a permit.
>>>
>>
>> Just helped a friend install a condensing furnace - pretty
>> straightforward job if you can read instructions. Total cost about $1200,
>> not bad considering he saved 3-4k over the contractor's price. Oh yeah,
>> the inspector said it was as good or better install than most pro's
>> perform.
>
> Not bad, since anyone can by a Goodman for less than that....
>
Not a Goodman and that includes 80' of 3" PVC, filter kit and bayvent
|