Home Page link

UV-C Light Purification

Home| Search | About
Login Password
Register Now! Lost Password?

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 4 of 4       << first < 1 2 3 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
UV-C Light Purification Jim 06-03-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Bill on June 4, 2007, 10:28 pm

> > " The motor for the unit would not have to work as hard
> >> because there is not restriction on the coil (mold) on the air flow"
> >
> >
> If the coil was all clogged up with mold, would there not be a

We use mold uncloggers. Surely you've checked out your competitors?

You really aren't too bright are you jimmy?

--
http://www.worldofwarcraft.com

Posted by Home Enviro Health Specialists on June 4, 2007, 10:36 pm
Bill wrote:
>
>>> " The motor for the unit would not have to work as hard
>>>> because there is not restriction on the coil (mold) on the air flow"
>>>
>> If the coil was all clogged up with mold, would there not be a
>
> We use mold uncloggers. Surely you've checked out your competitors?
>
> You really aren't too bright are you jimmy?
>
Bill with your knowledge someday I will be as smart as you. If you
pressure wash it or use chemicals, your putting additional VOC's into
the air with the chemicals, if you pressure wash you only get in maybe
1/4 of the coil. With the UC-V aluminum is the bets reflective source
for the light so it bounces in the Plenum or in the air handling room
everywhere, not only the coil.

--
Jim - UV-C Light Purification
e-mail: jsm@uvclightpurification.com
--------------------------
HVAC Coil Irradiation to kill *mold
Downsteam Air Purification
--------------------------
Proven case studies, EPA Evaluation, Etc.
http://www.uvclightpurification.com
--------------------------
Find an additional source of income to your present HVAC business and
provide a healthier environment for you clients, energy savings, and
extend life of the HVAC.
---------------------------
Please contact me with any questions or input that you may have.

Thank You

Posted by Bill on June 4, 2007, 10:58 pm
> >> If the coil was all clogged up with mold, would there not be a
> >
> > We use mold uncloggers. Surely you've checked out your competitors?
> >
> > You really aren't too bright are you jimmy?
> >
> Bill with your knowledge someday I will be as smart as you. If you
> pressure wash it or use chemicals, your putting additional VOC's into
snip

Dude. It's easy. Just use a flat stick.

--
http://www.worldofwarcraft.com

Page 4 of 4       << first < 1 2 3
Similar ThreadsPosted
UV-C Light Purification June 4, 2007, 8:17 pm
UV-C Light June 4, 2007, 5:30 pm
UV light and plastic parts December 28, 2006, 3:05 pm
Furnace Inconsistant Light-Off December 31, 2006, 3:07 pm
Water Heater Pilot Light Keeps Going Out October 17, 2006, 7:52 pm
Burners won't light in older furnace January 14, 2007, 2:47 pm
Furnace does not light main burner December 15, 2007, 9:37 pm
tappan heater wont heat - just sits there with steady red light November 4, 2007, 3:02 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap