Upside down Liquid Line Solenoid

Posted by on January 31, 2007, 11:01 pm

>Perhaps a little more info, I was the top, guy coworker was the bottom
>guy

This is already 'more information than I really wanted', and
brings up mental images I could do without. You might want to check
out Rich's thread on prison reunions tonight .....

> on a walk in cooler cond/evap change out he mounted the LLS coil
>down, but after reading the instruction admits there is a problem with
>that, but seems to think that the only thing that would happen is the LLS
>wouldn't close. What we see is liquid line frosting well before the LLS,
>box won't pull down to temp and low suction pressure. If he turns the LLS
>I think all our problem will be solved???
>Thoughts?

Nope. You have a restriction up-stream. Blocked drier ( you
DID change the drier, right ? with the right one, installed correctly
? ), kinked pipe, blocked pipe ( by poor brazing or kinking, etc )

>Coolking
>.p.jm@see_my_sig_for_address.com wrote in

>> On Wed, 31 Jan 2007 21:43:24 -0500, .p.jm@see_my_sig_for_address.com
>> wrote:
>>

>>>wrote:
>>>>What do you think would happen if a Splorlan LLS where installed coil
>>>>down?
>>> It would get vertigo.

>>
>> I forgot - don't forget to reverse the polarity so at least
>> the electrons dont' get confused.
>>
>>

--
Click here every day to feed an animal that needs you today !!!
http://www.theanimalrescuesite.com/

Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo now available online http://pmilligan.net/palm/

Posted by OK on January 31, 2007, 11:19 pm

Sounds like you've been there.

.p.jm@see_my_sig_for_address.com wrote in

>>Perhaps a little more info, I was the top, guy coworker was the bottom
>>guy

>
> This is already 'more information than I really wanted', and
> brings up mental images I could do without. You might want to check
> out Rich's thread on prison reunions tonight .....
>
>

>> on a walk in cooler cond/evap change out he mounted the LLS coil
>>down, but after reading the instruction admits there is a problem with
>>that, but seems to think that the only thing that would happen is the
>>LLS wouldn't close. What we see is liquid line frosting well before
>>the LLS, box won't pull down to temp and low suction pressure. If he
>>turns the LLS I think all our problem will be solved???
>>Thoughts?

>
> Nope. You have a restriction up-stream. Blocked drier ( you
> DID change the drier, right ? with the right one, installed correctly
> ? ), kinked pipe, blocked pipe ( by poor brazing or kinking, etc )
>

>>Coolking
>>.p.jm@see_my_sig_for_address.com wrote in

>>> On Wed, 31 Jan 2007 21:43:24 -0500, .p.jm@see_my_sig_for_address.com
>>> wrote:
>>>
>>>>wrote:
>>>>>What do you think would happen if a Splorlan LLS where installed
>>>>>coil down?
>>>> It would get vertigo.
>>>
>>> I forgot - don't forget to reverse the polarity so at least
>>> the electrons dont' get confused.
>>>
>>>

Posted by on January 31, 2007, 11:48 pm

>Sounds like you've been there.

Once or twice :-). Wanna buy any slightly wore-out
T-shirts ? I got some ......

I'm referring to correctly diagnosing your cooler, of course,
not your 'Who's on top tonight' situation .... I've been in many
prisons and jails, but I've never had to spend an un-paid minute in
one, and never had to spend the night :-)

>.p.jm@see_my_sig_for_address.com wrote in

>>>Perhaps a little more info, I was the top, guy coworker was the bottom
>>>guy

>>
>> This is already 'more information than I really wanted', and
>> brings up mental images I could do without. You might want to check
>> out Rich's thread on prison reunions tonight .....
>>
>>

>>> on a walk in cooler cond/evap change out he mounted the LLS coil
>>>down, but after reading the instruction admits there is a problem with
>>>that, but seems to think that the only thing that would happen is the
>>>LLS wouldn't close. What we see is liquid line frosting well before
>>>the LLS, box won't pull down to temp and low suction pressure. If he
>>>turns the LLS I think all our problem will be solved???
>>>Thoughts?

>>
>> Nope. You have a restriction up-stream. Blocked drier ( you
>> DID change the drier, right ? with the right one, installed correctly
>> ? ), kinked pipe, blocked pipe ( by poor brazing or kinking, etc )
>>

>>>Coolking
>>>.p.jm@see_my_sig_for_address.com wrote in
>>>> On Wed, 31 Jan 2007 21:43:24 -0500, .p.jm@see_my_sig_for_address.com
>>>> wrote:
>>>>
>>>>>wrote:
>>>>>>What do you think would happen if a Splorlan LLS where installed
>>>>>>coil down?
>>>>> It would get vertigo.
>>>>
>>>> I forgot - don't forget to reverse the polarity so at least
>>>> the electrons dont' get confused.
>>>>
>>>>

Posted by Geoman on January 31, 2007, 11:40 pm

>>Perhaps a little more info, I was the top, guy coworker was the bottom
>>guy

> This is already 'more information than I really wanted', and
> brings up mental images I could do without. You might want to check
> out Rich's thread on prison reunions tonight .....

Ah man, that's sick! BTW, I'm dead serious about renting that place.
Did you look at the big caged area where I plan on having the disc Jockey
with dancing to "Jail House Rock!" ? Did you see the picture on the wall
of Stalin from the movie Air Force One? That prison is really really cool
and freaky. I wish I was there that night they landed that soviet
helicopter to pick up that commie President.

If I can afford this place and maybe put in a temp furnace for that area
since the building is cold with no heat, my wife is going to freak out!
Kids will be talking about that party at my funeral for sure, being glad o'l
dad is finally in a place where they feel safe ...... He he he!

You can spend the night in that place, locked in cells. Wow, what a way to
celebrate 25 years of being in.......... heaven....

Posted by on January 31, 2007, 11:50 pm

wrote:

>>>Perhaps a little more info, I was the top, guy coworker was the bottom
>>>guy

>> This is already 'more information than I really wanted', and
>> brings up mental images I could do without. You might want to check
>> out Rich's thread on prison reunions tonight .....

>Ah man, that's sick! BTW, I'm dead serious about renting that place.
>Did you look at the big caged area where I plan on having the disc Jockey
>with dancing to "Jail House Rock!" ? Did you see the picture on the wall
>of Stalin from the movie Air Force One? That prison is really really cool
>and freaky. I wish I was there that night they landed that soviet
>helicopter to pick up that commie President.
>If I can afford this place and maybe put in a temp furnace for that area
>since the building is cold with no heat, my wife is going to freak out!
>Kids will be talking about that party at my funeral for sure, being glad o'l
>dad is finally in a place where they feel safe ...... He he he!
>You can spend the night in that place, locked in cells. Wow, what a way to
>celebrate 25 years of being in.......... heaven....

What a great way to assure that you don't get laid for at
least a year :-)

--
Click here every day to feed an animal that needs you today !!!
http://www.theanimalrescuesite.com/

Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo now available online http://pmilligan.net/palm/

Page 2 of 3 < 1 2 3 > last >>

Similar Threads	Posted
liquid line in condensate	June 27, 2007, 7:56 am
Liquid Line Filter Drier Replacement Schedules	November 22, 2006, 6:50 pm
Running a mini refrigerator upside down?	February 20, 2008, 2:09 pm
possible to replace solenoid in Goodman gas valve	April 30, 2007, 12:44 am
Rheem Heat Pump blowing Reversing Solenoid	December 27, 2008, 12:28 pm
2 line oil line hook up.DOMESTIC.	November 18, 2006, 9:53 pm
Freezing liquid lines	February 13, 2007, 1:56 pm
Brown liquid from flue pipe	November 13, 2007, 11:54 pm
minisplit evac & reweighing of liquid charge	May 13, 2008, 12:00 pm
R22 TO 410: HAVE TO REPLACE LINE??	July 6, 2007, 8:46 am

Upside down Liquid Line Solenoid - Page 2