If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by W on December 10, 2008, 2:03 am
Does anyone make an electrically activated room vent and matching thermostat
that is wireless? We have two small rooms in a facility that were
balanced, but the occupants of each room have incompatible comfort
requirements. What we would like to find is a cheap room vent that could
be given high and low set points by each user, and when those set points are
reached the vents shut close. We would even be okay with a battery
operated vent, with a power out condition resulting in the vent going to
open (failsafe to open). Basically any design that lets us give each user
some additional control on their personal room environment, with a design
that allows a low install cost, would be desired. We tried thermafusers,
and they just are not very reliable, and they tend to be a hassle to set,
and almost impossible to explain to the end user.
Any products worth recommending for this application?
--
W
|
|
Posted by Bubba on December 10, 2008, 7:39 am
wrote:
>Does anyone make an electrically activated room vent and matching thermostat
>that is wireless? We have two small rooms in a facility that were
>balanced, but the occupants of each room have incompatible comfort
>requirements. What we would like to find is a cheap room vent that could
>be given high and low set points by each user, and when those set points are
>reached the vents shut close. We would even be okay with a battery
>operated vent, with a power out condition resulting in the vent going to
>open (failsafe to open). Basically any design that lets us give each user
>some additional control on their personal room environment, with a design
>that allows a low install cost, would be desired. We tried thermafusers,
>and they just are not very reliable, and they tend to be a hassle to set,
>and almost impossible to explain to the end user.
>Any products worth recommending for this application?
What you want, and "cheap" are NOT going to happen.
Would you like fries with that?
Bubba
|
|
Posted by on December 10, 2008, 9:43 am
wrote:
>Does anyone make an electrically activated room vent and matching thermostat
>that is wireless? We have two small rooms in a facility that were
>balanced, but the occupants of each room have incompatible comfort
>requirements. What we would like to find is a cheap room vent that could
>be given high and low set points by each user, and when those set points are
>reached the vents shut close. We would even be okay with a battery
>operated vent, with a power out condition resulting in the vent going to
>open (failsafe to open). Basically any design that lets us give each user
>some additional control on their personal room environment, with a design
>that allows a low install cost, would be desired. We tried thermafusers,
>and they just are not very reliable, and they tend to be a hassle to set,
>and almost impossible to explain to the end user.
>Any products worth recommending for this application?
Srew that. tell them that times are tough, they are lucky to have a
job\, quit whining and get back to ork. If they don't like it show
them the door.
I am the real ftwhd and I approve this message.
|
|
Posted by geothermaljones on December 10, 2008, 7:09 pm
Arzel?
> Does anyone make an electrically activated room vent and matching
> thermostat that is wireless? We have two small rooms in a facility that
> were balanced, but the occupants of each room have incompatible comfort
> requirements. What we would like to find is a cheap room vent that
> could be given high and low set points by each user, and when those set
> points are reached the vents shut close. We would even be okay with a
> battery operated vent, with a power out condition resulting in the vent
> going to open (failsafe to open). Basically any design that lets us
> give each user some additional control on their personal room environment,
> with a design that allows a low install cost, would be desired. We tried
> thermafusers, and they just are not very reliable, and they tend to be a
> hassle to set, and almost impossible to explain to the end user.
> Any products worth recommending for this application?
> --
> W
>
|
|
Posted by ignisuti on December 15, 2008, 10:04 am
wrote:
> Arzel?
> > Does anyone make an electrically activated room vent and matching
> > thermostat that is wireless? =A0 =A0We have two small rooms in a facili=
ty that
> > were balanced, but the occupants of each room have incompatible comfort
> > requirements. =A0 =A0What we would like to find is a cheap room vent th=
at
> > could be given high and low set points by each user, and when those set
> > points are reached the vents shut close. =A0 =A0We would even be okay w=
ith a
> > battery operated vent, with a power out condition resulting in the vent
> > going to open (failsafe to open). =A0 =A0Basically any design that lets=
us
> > give each user some additional control on their personal room environme=
nt,
> > with a design that allows a low install cost, would be desired. =A0 We =
tried
> > thermafusers, and they just are not very reliable, and they tend to be =
a
> > hassle to set, and almost impossible to explain to the end user.
> > Any products worth recommending for this application?
> > --
> > W
To all you nay-sayers here...
I created something that does exactly what he's asking for as a senior
design project for my Electrical Engineering degree. Unfortunately,
it's not in production yet as the design is still undergoing
improvements.
|
Page 1 of 2 1 2 > last >>
| Similar Threads | Posted | | Wireless Thermometer | June 27, 2008, 2:13 am |
| thermostat control (data logging) | September 9, 2006, 11:33 pm |
| Prog thermostat with auto fan control? | June 1, 2007, 8:51 am |
| Low price remote wireless thermometer | August 23, 2008, 11:28 am |
| conversion from a steam system to individual systems in a 23 unit apartment bldg | November 8, 2006, 1:37 am |
| where should the a/c vents be positioned. | April 9, 2007, 11:30 pm |
| Geothermal and new vents | October 30, 2007, 8:38 am |
| Temperature of exhaust vents | July 30, 2006, 7:02 pm |
| Re: Temperature of exhaust vents | August 2, 2006, 12:53 am |
| Basement Vents Open or Closed? | March 22, 2007, 11:14 pm |
|
|
>that is wireless? We have two small rooms in a facility that were
>balanced, but the occupants of each room have incompatible comfort
>requirements. What we would like to find is a cheap room vent that could
>be given high and low set points by each user, and when those set points are
>reached the vents shut close. We would even be okay with a battery
>operated vent, with a power out condition resulting in the vent going to
>open (failsafe to open). Basically any design that lets us give each user
>some additional control on their personal room environment, with a design
>that allows a low install cost, would be desired. We tried thermafusers,
>and they just are not very reliable, and they tend to be a hassle to set,
>and almost impossible to explain to the end user.
>Any products worth recommending for this application?