Home Page link

XR13 clearance from house

Home| Search | About
Login Password
Register Now! Lost Password?

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
XR13 clearance from house ncstate 07-26-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on July 26, 2007, 3:59 pm
Anyone know what the minimum clearance reqirements are from the
outside wall of the house for a Trane XR13 heat pump? My was installed
18-20" away and it seems a bit much to me.


Posted by geojr on July 26, 2007, 5:03 pm

> Anyone know what the minimum clearance reqirements are from the
> outside wall of the house for a Trane XR13 heat pump? My was installed
> 18-20" away and it seems a bit much to me.
You try to clean the bitch then-if it was up to me it would be even further
:-)



Posted by The Freon Cowboy on July 26, 2007, 5:07 pm
further the better , as long as the line set is sized properly ,
how bout under that big old shade tree , so its not sitting and baking in the
sun
on a hot july afternoon ?



ncstate@gmail.com wrote:
>Anyone know what the minimum clearance reqirements are from the


Posted by Jeffrey Lebowski on July 27, 2007, 9:42 pm


>
> how bout under that big old shade tree , so its not sitting and baking in
the
> sun
> on a hot july afternoon ?
>

Generally speaking, this produces barely noticable difference annually.

Mostly concerns air mass flow--meaning you would need to supply a tremendous
volume of pre-cooled air on a per-minute basis in order make a significant
impact here.

--



Posted by Tony on July 26, 2007, 6:10 pm
Space needed is that man can work on equipment
without bosting his or her ass.

> Anyone know what the minimum clearance reqirements are from the
> outside wall of the house for a Trane XR13 heat pump? My was installed
> 18-20" away and it seems a bit much to me.
>



Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
Seen at a supply house July 16, 2006, 8:54 am
Would you let a guy named Bubba into your house? July 30, 2006, 9:21 pm
Jake's house around the holidays December 17, 2006, 6:58 pm
Removal of old whole house attic fan January 26, 2007, 9:56 pm
NEED DESIGN HELP FOR TIGHT HOUSE February 20, 2007, 4:26 pm
Thermostat - The best place for one in a house? April 22, 2008, 4:40 pm
Should my house reach 75 degrees? June 10, 2008, 6:28 am
I just moved into a house with bad duck work. July 12, 2006, 12:13 am
New Addition to House, Now cooling problem August 16, 2006, 12:29 pm
House not staying warm at night February 10, 2007, 9:31 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap