|
Posted by udarrell on August 7, 2006, 3:18 pm
daytona wrote:
>It is most likely that the compressor was replaced with the same size. But
>on a few occasions, I have had seen business' put what ever they had in the
>shop in units. Case in point. My father's place in FL. My mother and father
>were in between residences and rented a place. He always complained that the
>air didn't cool the house. So he bought a window shaker and installed it in
>the bedroom. I go down to spend sometime and told I would check. I pulled
>the blower motor and cleaned it, cleaned the evap and condensor oil. Still
>not cooling properly. I finally get the compressor models numbers and made a
>few calls and found out that someone installed a 24,000 BTU Bristol compressor
>in a 36,000 BTU condensor. So take it from here.
>
>
WOW!
In the old 6-SEER & older units a compressor with a little more Btuh
than the condenser rating was not unusual.
- udarrell
--
Air Conditioning's Affordable Path to the "Human Comfort Zone Goal"
http://www.udarrell.com/air-conditioning-total-heat-enthalpy-latent-heat.html HVAC Techs:
http://www.udarrell.com/ac-trouble-shooting-superheat-subcooling.html
|